Home » Manfrotto

Spare rubber foot for the Manfrotto 685B monopod plus any others accepting the Manfrotto part number R440,58. Pack of one rubber foot.

More information

Spare leg tightening screw for the Manfrotto 055XDB and 190XDB tripods plus any others accepting the Manfrotto part number R055,68. Pack contains screw clamp, bolt, washer and spring.

More information

Spare quick release plate for Manfrotto Modo Mini and Maxi tripods.

More information

MN 200PL38 3/8 rectangular quick release plate.

More information

Rectangular quick release plate.

More information

Spare quick release plate for RC4 style heads, such as the Manfrotto 808RC4. Supplied with 1/4 inch and 3/8 inch screws.

More information

MN 200PL14 1/4 architectural quick release plate.

More information

MN 200PL38 3/8 architectural quick release plate.

More information

Simple tilt head to allow a camera on a monopod to be turned 90 degrees to provide either vertical or horizontal format. Maximum load capacity 2.5kg.

More information

Manfrotto tripod handle strap which is suitable for use with light video tripods plus head. Allows you to easily and comfortably carry your tripod by hand. Adjustable in length. Lightweight and ergomonic.

More information

A set of two tools to adjust the locking collars of most of Manfrotto’s tripods, stands and monopods. The kit contains a Phillips screwdriver type 2, and a hexagonal tubular socket #8.

More information

This handy adapter will convert a 3/8 inch thread, as found on many Manfrotto tripods, to a 1/4 inch thread for either attaching your camera direct or attaching your choice of head with a 1/4 thread on the base. Weighs just 0.13 kg. Diameter 60mm. Ma.....

More information

Hand carrying strap suitable for Manfroto 190 series, 055 series, 055WNB, 458B, Mag Fiber and PRO series models. It can be adjusted in length for a better balance whilst being carried. Rubberised hand grip for a secure hold. Lightweight. Not suitable.....

More information

Spare quick release plate for the Manfrotto 561B monopod and 501HDV and 503 HDV video heads. Supplied with 1/4 inch and 3/8 inch camera fixing screws. Dimensions: 86 x 38 x 11mm (LxDxH). Black finish.

More information

The Manfrotto 797 ModoPocket is the world's smallest tripod and weighs just 50 grams. Suitable for compact cameras up to 500g in weight this is a truly pocket sized, go anywhere tripod. Top attachment is a 1/4 inch screw thread. Simply screws into yo.....

More information

Manfrotto tripod shoulder strap which is suitable for use with smaller Manfrotto tripods such as the 055 and 190 series. One end fixes around the closed tripod legs, the other attaches to the tripod via the ring positioned under the collar. Adjustabl.....

More information

Set of 3 reversible rubber/metal spiked feet with dedicated fixing tool. For older 19mm bottom leg tube tripods dated before 09/2004 - 190D, 190CL, 190PRO, 190WNB, 756B and 190NAT3.

More information

A simple loop strap that attached to the steel ring at the shoulder of the tripod. Features an adapter for compatibility with all Manfrotto tripods. Strap is in grey rubberised fabric for comfort and to avoid the tripod slipping on your shoulder.

More information

Provides support when a tripod cannot be used. A 5 section monopod that folds down to a compact 15.4 inches.

More information

Designed to fit to the top end of any make of monopod to give additional stability. Adjustable length with pivoting shoulder support.

More information

Black finish aluminium short centre column for 190XB, 190XDB and 190XWNB series tripods. This column allows you to move the camera up and down, even when the legs are set at the third level of inclination (about 60 degrees). Length is approx 16.5cm. .....

More information

This handy clamp allows you to mount your binoculars onto a tripod or monopod to help support them and keep them steady. Will clamp onto any binocular with a tube size from 13 to 55mm. Will accept binoculars up to 15kg. Standard 1/4 inch thread on th.....

More information

The Manfrotto 323 is an adapter which allows you to add a quick release plate system to your existing head, tripod or monopod. Attaches to any 1/4 or 3/8 inch screw thread. Supplied with a 200PL-14 quick release plate with standard 1/4 inch thread. M.....

More information

70cm unpadded tripod bag complete with an adjustable shoulder strap. Design allows the head to be left on when being carried in the case. Exterior constructed from tough ballistic nylon with a smart red trim. Length 70cm. Diameter 15cm (13cm at the b.....

More information

The Manfrotto 102 tripod strap is an adjustable carry strap for all Manfrotto tripods. It has a spring clip that fastens onto the steel ring at the shoulder of the tripod, and a closed loop that goes around the feet of the tripod and tightens to grip.....

More information

Spare quick release plate for the Manfrotto 562B monopod and the 357 sliding plate adapter. Supplied with 2x 1/4 inch and 2x 3/8 inch camera fixing screws. Dimensions: 140 x 44 x 6mm (LxDxH). Black finish.

More information

Simple tilt head to allow a camera on a monopod to be turned 90 degrees to provide either vertical or horizontal format. With quick release camera plate system and secondary safety lock.

More information

Set of three reversible rubber/metal spiked feet suitable for the Manfrotto 190CXPRO4 tripod model. Supplied with a dedicated fixing tool. The spike is made from a special hard anodised alloy extremely resistant to corrsion.

More information

Set of three reversible rubber/metal spiked feet suitable for the Manfrotto 055CX3 and 055CXPRO3 tripod models. Supplied with a dedicated fixing tool. The spike is made from a special hard anodised alloy extremely resistant to corrsion.

More information

Set of three reversible rubber/metal spiked feet suitable for the Manfrotto 190XB, 190XDB, 190XPROB, 190CX3, 190CXPRO3 and 055CXPRO4 tripod models. Supplied with a dedicated fixing tool. The spike is made from a special hard anodised alloy extremely .....

More information

Set of three reversible rubber/metal spiked feet suitable for the Manfrotto 055XB, 055XDB and 055XPROB tripod models. Supplied with a dedicated fixing tool. The spike is made from a special hard anodised alloy extremely resistant to corrsion.

More information

Ultra compact and lightweight aluminium micro ball head with a 2kg load capacity. Ideal for ultra compact D-SLR, compact and bridge digital cameras. Fixed top plate with standard 1/4 inch screw. Weighs just 140 grams. Bottom thread is 3/8 inch. Repla.....

More information

Compact and lightweight four section monopod with rapid action extension locks. Suitable for both cameras and compact spotting scopes. Maximum extended height 152.5cm. Closed length 48cm. Standard 1/4 inch fixing screw. Load capacity of 4.5kg. Replac.....

More information

80cm unpadded tripod bag complete with an adjustable shoulder strap. Design allows the head to be left on when being carried in the case. Exterior constructed from tough ballistic nylon with a smart red trim. Length 80cm. Diameter 15cm (14cm at the b.....

More information

Tabletop tripod with ball & socket action. Folds down very small. Black finish.

More information

A tiny table top tripod perfect for a number of applications. Brushed aluminium silver finish. Complete with built in mini ball head.

More information

Compact and lightweight aluminium mini ball head with a 4kg load capacity. Ideal for compact D-SLR and bridge style digital cameras. Fixed top plate with standard 1/4 inch screw. Weighs just 220 grams. Bottom thread is 3/8 inch. Replaces the 484 Mini.....

More information

3 sections - hand strap and rubber grip. 4kg. Black.

More information

This sliding plate gives you the freedom to remove the camera from the head and put it on any other support. Supplied with 2x 1/4 inch and 2x 3/8 inch camera screw. Sliding travel of plate 80mm.

More information

Ideal for travelling, hiking and sports with a folded length of just 43.5cm. Maximum working height with the centre column extended 150.5cm. Weighs just under 1kg. Built in head with quick release plate system. Minimum working height of 17.5cm. Load .....

More information

Compact and lightweight aluminium mini ball head with a 4kg load capacity. Ideal for compact D-SLR and bridge style digital cameras. Quick release plate system for faster attaching and removing of your camera from the head. Comes with the 200PL-14 qu.....

More information

Compact aluminium ball head with a 6kg load capacity. Fixed top plate with standard 1/4 inch screw. Weight is 320 grams. Bottom attachment is 3/8 inch female thread. Working height of 9.0cm. Replaces the 486 Compact Ball Head.

More information

The Manfrotto 678 is a self standing base accessory for the Manfrotto 679, 680 and 681 monopods. There are three extending high strength steel legs which once extended give the monopod extra stability. They extend and retract in seconds making this a.....

More information

4 section monopod with strap and rubber grip. Black.

More information

Replacing the popular 390RC2, the 391RC2 is a newly redesigned 3 way aluminium head suitable for both video and photography applications. It has a quick release plate system (200PL-14) for easier mounting of your equipment. Maximum load capacity of 5.....

More information

Basic panoramic adapter that can be mounted on top of a head, monopod, or tripod. The adapter has a graduated scale in millimetres to set the camera position.

More information

80cm padded tripod bag complete with shoulder strap and end handle. Design allows the head to be left on when being carried in the case. Exterior constructed from tough ballistic nylon with a smart red trim. Length 80cm. Diameter 15cm (14cm at the ba.....

More information

Tripod backpack with multiple compartments for your Modo tripod plus camera and accessories. Well padded and built in handle.

More information

Black anodized aluminium 3 section monopod, 161cm maximum height, 67cm closed, weight 0.8kg.

More information

Compact and lightweight aluminium mini ball head with a 6kg load capacity. Quick release plate system for faster attaching and removing of your camera from the head. Comes with the 200PL-14 quick release plate with standard 1/4 inch screw. Weight is .....

More information

Replacing the best selling 141RC2, this new model is now made from Adapto which is extremely strong and light and has a counterbalance spring for easier positioning of heavier, off centre loads. Quick release plate system for easier camera attachment.....

More information

Column clamp for 190 and 055 tripods.

More information

Ideal for use with video cameras, lightweight and compact 4 section monopod with flip lock levers. Maximum height 160.8cms.

More information

This long version of the standard 501 plate allows perfect balance for cameras or camcorders with unusual weight distribution caused by long tele lenses or heavy batteries. It has a laser engraved scale to help identify the optimal position. Supplied.....

More information

The most compact of the M-Y tripod family, the 7322YSHB features 4 leg sections to fold down to just 42cm. Lightweight and compact aluminium tripod with a built in compact ball head. Maximum working height of 119cm. Minimum working height of 31.5cm. .....

More information

Lens bracket which helps support heavy telephoto or tele macro lenses which don't have a tripod collar. Eases strain on the camera lens mount when mounted on a tripod. The length of the bracket is adjustable to take different length and diameter lens.....

More information

Column clamp for 440, 441, 443 and 444 carbon fibre tripods.

More information

90cm padded tripod bag complete with shoulder strap and top handle. Design allows the head to be left on when being carried in the case. Exterior constructed from tough ballistic nylon with a smart red trim. Length 90cm. Diameter 23cm (20cm at the ba.....

More information

Compact and lightweight head suitable for use with video and also very popular with birders. Choice of black or green.

More information

Lightweight magnesium 3D camera head which can be positioned in virtually any position to get the exact framing angle you require. Rubber grip knobs for fingertip control. Ideal for 35mm and digital SLR cameras and also medium format cameras. Load ca.....

More information

The Manfrotto M-Y 7322YB is a compact 4 section aluminium tripod complete with a ball head. Maximum working height of 141cm and closed length of 48cm. The legs have 4 sections and can be set to two different angles. Comes complete with a carry bag. S.....

More information

The Manfrotto 454 is a micro positioning plate which is ideal for macro photography and precise copy/reproduction work. It has finger tip controls for ultra fine adjustment of your camera. It allows for two plates to be interlocked at 90 degrees for .....

More information

Aluminium ball head with a 8kg load capacity. Fixed top plate with standard 1/4 inch screw. Weighs 520 grams. Bottom attachment is 3/8 inch female thread. Working height of 11.5cm. Replaces the 488 Midi ball head.

More information

Light and compact 3 section professional monopod. Features a 577 sliding camera plate adapter to adjust the centre of balance. Maximum height of 159cms.

More information

100cm padded tripod bag complete with shoulder strap and top handle. Design allows the head to be left on when being carried in the case. Exterior constructed from tough ballistic nylon with a smart red trim. Length 100cm. Diameter 23cm (20cm at the .....

More information

Very sturdy and stable all metal midi ball head with the RC4 quick release system. Max load weight of 8kg. Built in spirit levels for accurate alignment.

More information

Lightweight and compact aluminium tripod with a built in 3 way photo / video head. The head has independent pan and tilt locks, an ergonomic bar and a quick release plate. Maximum working height of 142cm. Minimum working height of 35cm. The tripod le.....

More information

Fast action - joystick style head with spirit level .78kg.

More information

Aluminium ball head with a 8kg load capacity. Quick release plate system for quicker and easier attachment and removal of your camera to the head. Comes with a 200PL-14 plate with standard 1/4 inch screw. Weighs 610 grams. Bottom attachment is 3/8 in.....

More information

Solid, stable 3 section professional monopod. Maximum height of 164cms. Suction cup foot, wrist strap and only 67cms when folded.

More information

Replacing the 190CLB, this newly updated 190XDB is a simple and functional aluminium tripod with a maximum operating height of 146cm. It has an ergonomic leg angle release mechanism and wing locking knobs. Closed length 53.5cm. Weight 1.6kg with a ma.....

More information

The Manfrotto 560B-1 monopod is perfect for video camera users. It features a fluid cartirdge built into the base of the monopod which gives you an ultra smooth panning action. Maximum working height is 166.5cm. Load capacity of 2.0kg. Retractable, p.....

More information

Aluminium ball head with a 8kg load capacity. Quick release plate system (RC4) for quicker and easier attachment and removal of your camera to the head. Comes with a 410PL plate with dual 1/4 inch and 3/8 inch screw threads. Weighs approx 700 grams. .....

More information

The Manfrotto 701HDV head has been designed to support prosumer and lightweight professional HD camcorders. The head replaces the 701RC2 and offers improved ergonomics, better fluidity thanks to improved internal fluid cartridges, a double pan bar ro.....

More information

Newly redesigned, the 190XB is now lighter in weight and slightly more compact. Maximum working height 146cms, minimum 8cms. Only 1.8kg. Closed length just 54cms. Requires head.

More information

Heavy duty, all metal construction grip ball head with ergonomic positioning control. Allows you to move and lock your camera in position with one hand thanks to the easy to use grip handle. Maximum load capacity of 5kg. Uses 200PL-14 quick release p.....

More information

Compact aluminium tripod with an integrated ball head. The head has +90/-90 degree orientation grooves and a repositionable locking lever plus a quick release plate. Maximum working height of 144cm. Minimum working height of 36cm. The tripod legs can.....

More information

Aluminium 3 way head which replaces the popular 329RC4 model. Now features counter balance springs for smooth positioning of heavier loads.

More information

Limited stocks of this kit. This tripod kit contains the Manfrotto M-Y 7322YB tripod plus the new Manfrotto rucksack. The M-Y 7322YB is a compact 4 section aluminium tripod complete with a ball head. Maximum working height of 141cm a.....

More information

Compact aluminium tripod with an integrated 3 way aluminium head. The head has seperate pan and tilt locks and a quick release plate. Maximum working height of 143cm. Minimum working height of 36cm. The tripod legs can be set independently in two dif.....

More information

Lightweight and sturdy black aluminium tripod which has a maximum operating height of approx 178cm. Closed length approx 61cm. Minimum working height of 48cm. Weight 2.10kg with a maximum load capacity of 7.0kg. Based on the 055XB but with a simpler .....

More information

Newly redesigned, the 190XV is lighter in weight and more compact for outstanding performance. The ergonomics of the leg angle release mechanism and the quick action leg locks have also been improved. Maximum working height 146cm. Closed length 53.5c.....

More information

Newly redesigned, the 190XPROB makes the famous horizontal centre column feature even easier to use. Maximum working height with the centre column raised 146cm. Improved leg locks. Black finish. Requires an optional head. Closed length 57cm. 5kg maxi.....

More information

Replacing the popular 055CL and 055CLB models, the new 055XB is built on the same improved design of the 055XPROB but without its horizontal centre column feature. Now lighter and slightly more compact than its predecessor the 055XB now features impr.....

More information

Limited stocks - Save ££s on this tripod and head package. Lightweight and sturdy aluminium tripod which comes complete with the Manfrotto 222 joystick head. Maximum operating height of approx 198cm. Closed length approx 82cm. Weight.....

More information

Safety lever system enables one handed adjustment of height, max 170cm, closed 74.5cm, weight 0.8kg.

More information

Allows you to take sequential constant angle shots around a single axis. 14kg maximum weight.

More information

Replacing the popular 055 Pro and Pro B models, the new 055X Pro B make the famous horizontal centre column even easier to use. Just extend the centre column to it's highest position and then swing round to horizonal without the need to remove the he.....

More information

4 section black aluminium monopod complete with a fixed 357 sliding plate. Maximum height of 193cm, folds down to just 69cm. Weighs 1.43kg with a maximum load capacity of 8kg. Features both 1/4 inch and 3/8 inch screw attachments.

More information

The Manfrotto 501HDV is a video head which features a counterbalance spring to ensure smooth movements. This head replaces the 501 and offers improved ergonomics. 6.00kg load capacity. Seperate pan and tilt locks. Gradual tilt friction adjustment sys.....

More information

Lightweight four section CF monopod. Features carbon fibre legs with magnesium castings. Closed length of 54cm. Maximum raised height of 165cm. Rapid action extension locks. Wrist strap. Dual 1/4 and 3/8 inch camera fixing screw. Weighs just 0.59kg. .....

More information

Compact, 4 section carbon fibre tripod that is extremely lightweight but still offers good rigidity. Maximum working height of 134.5cm. Closed length of just 42.5cm. Weighs just 0.95kg. Maximum load capacity of 3.5kg. Requires a head which are sold s.....

More information

Limited stocks of this great value tripod / head kit. Compact, 4 section carbon fibre tripod complete with the Manfrotto 484RC2 ball head. Extremely lightweight but still offers good rigidity. Maximum working height of approx 144cm. .....

More information

Extremely compact and lightweight five section monopod. Features carbon fibre legs, aluminium column and magnesium/aluminium castings. Closed length of just 47.5cm. Maximum raised height of 160.5cm. Rapid action extension locks. Wrist strap. Dual 1/4.....

More information

Extremely compact aluminium 3 way geared head which offers precise movement on all three axis. You can also disengage the gears and roughly position the camera by hand, then re-engage them for precise final alignment. Maximum load capacity 5kg. Uses .....

More information

Advanced hydraulic ball head. Lightweight but able to support loads up to 16kg.

More information

Save money on this tripod & head package. Lightweight and sturdy aluminium tripod which comes complete with the Manfrotto 804RC2 3 way head. Features Manfrotto's famous horizontal centre column. Maximum operating height of 190.5cm. C.....

More information

Aluminium 4 section monopod with a maximum working height of 200cm. Includes a fluid head with a long sliding plate. Ergonomic pan bar for smooth panning and tilting movements. Closed length is 76.5cm. Weighs 1.91kg. Load capacity of 4kg. Uses the 50.....

More information

Save ££s on this Manfrotto tripod and head package. Great package for spotting scope and video camera users. Lightweight and compact aluminium tripod which comes complete with the Manfrotto 701HDV Pro Fluid Mini Video head. Maximum o.....

More information

Lightweight but sturdy advanced ball head with a high load capacity. Uses a revolutionary friction and locking mechanism with an inner oil chamber which gives ultra smooth movement. Load capacity of 16kg. Quick release plate system with 030-14 plate .....

More information

Three section carbon fibre tripod that is extremely lightweight but still offers good rigidity. Aluminium centre column which includes a low angle adapter at the bottom. Maximum working height of 146cm. Closed height of 55cm. Maximum load capacity of.....

More information

Lightweight but sturdy advanced ball head with a high load capacity. Uses a revolutionary friction and locking mechanism with an inner oil chamber which gives ultra smooth movement. Load capacity of 10kg. Quick release plate system with 200PL-14 plat.....

More information

Lightweight but sturdy advanced ball head with a high load capacity. Uses a revolutionary friction and locking mechanism with an inner oil chamber which gives ultra smooth movement. Load capacity of 12kg. Quick release sliding plate with 501PL plate .....

More information

Lightweight but sturdy advanced ball head with a high load capacity. Uses a revolutionary friction and locking mechanism with an inner oil chamber which gives ultra smooth movement. Load capacity of 16kg. Quick release plate system with 410PL plate s.....

More information

Lightweight but sturdy advanced ball head with a high load capacity. Uses a revolutionary friction and locking mechanism with an inner oil chamber which gives ultra smooth movement. Load capacity of 16kg. Quick release sliding plate with a 357PL plat.....

More information

Black aluminium tripod with a unique centre brace structure system and non rollback three faceted geared centre column. Maximum working height of 188cm. Load capacity of 12kg. Built in spirit level. Rubber / metal spiked feet. Three leg sections with.....

More information

Three section carbon fibre tripod that is extremely lightweight but still offers good rigidity. Features Manfrotto's quick change vertical-horizontal centre column and an integrated spirit level on the top plate. Maximum working height of 146cm. Clos.....

More information

Save ££s on this Manfrotto tripod and head package. Great package for spotting scope and video camera users. Contains the Manfrotto 055XB Classic Black tripod plus Manfrotto 701HDV Pro Fluid Mini Video head and the Manfrotto MBAG80N .....

More information

Four section carbon fibre tripod that is extremely lightweight but still offers good rigidity. Features Manfrotto's quick change vertical-horizontal centre column and an integrated spirit level on the top plate. Maximum working height of 146cm. Close.....

More information

Three section carbon fibre tripod that is extremely lightweight but still offers good rigidity. Aluminium centre column that features a low angle adapter which can be used as a short column. Maximum working height of 177cm. Minimum working height of .....

More information

Three section carbon fibre tripod that is extremely lightweight but still offers good rigidity. Maximum working height of 177cm. Minimum working height of 57cm. Closed height of 61.5cm. Maximum load capacity of 8kg. Requires a head which are sold sep.....

More information

Four section carbon fibre tripod that is extremely lightweight but still offers good rigidity. Features Manfrotto's quick change vertical-horizontal centre column and an integrated spirit level on the top plate. Maximum working height of 170cm. Minim.....

More information

Three section carbon fibre tripod that is extremely lightweight but still offers good rigidity. Features Manfrotto's quick change vertical-horizontal centre column and an integrated spirit level on the magnesium top plate. Maximum working height of 1.....

More information

Ultra fast and easy to use, featuring Manfrotto's Neotec quick opening and closing mechanism. Maximum load capacity of 8kg. Maximum working height with centre column extended 156cm. Built in carrying handle. 10cm minimum working height using a two se.....

More information

The Manfrotto 405 head is a heavy duty 3D geared head which allows for fast, pinpoint positioning of 35mm, digital or medium format equipment up to 7.5kg. It has large, easy to grip knobs that provide smooth, positive geared control through 360 degre.....

More information