Metz SCA 3402 Nikon Adapter

No Specification

Write your own Metz SCA 3402 Nikon Adapter Review


Reviewed by Graeme Duncan

Date Added: Tuesday 07 October, 2008

The Metz SCA 3002 system can almost perfectly match any camera system. This Nikon adapter even allows for iTTL control. I like using both Canon and Nikon so I need only one gun that will work on both equally well

Rating: [5 of 5 Stars!]

Ask Bristol Cameras a question about the Metz SCA 3402 Nikon Adapter

Please check any common questions above before posting as we may not reply to any questions that have been answered previously. We reserve the right to publish your question to this website for the future benefit of other users with similar queries. We may carry out minor editorial changes to the content. All FAQ's remain copyright Bristol Cameras.

Metz SCA 3402 Nikon Adapter Question

Date Added: 13th October 2010
Question: Will my old Metz 45 CT 3 / SCA 300 combination be usable with - or damage my D90?
Bristol Cameras Answer: Hi, as the 45 CT-3 is an older non Digital flashgun then you would have to use the SCA 301 standard foot plus SCA 300A connection cable. You would only get basic Auto/Manual operation, no TTL unfortunately.
Metz SCA 3402 Nikon Adapter Question

Date Added: 27th July 2010
Question: I have a Nikon D90 camera and a Metz 44 MZ-2, can I use the SCA 3402 Nikon adapter?
Bristol Cameras Answer: Hi, yes as long as your Metz 44 MZ-2 is the Digital version then the SCA 3402 (minimum M8 version) would be compatible.
Metz SCA 3402 Nikon Adapter Question

Date Added: 25th April 2010
Question: What SCA adaptor do I need to use my Metz 54 MZ-3 flashgun on the Nikon D70.
Bristol Cameras Answer: Hi, you can use the SCA 3402 (M8 version onwards) however as the flashgun is not a Digital compatible flashgun then you will only have auto and manual flash modes, not TTL unfortunately.
Metz SCA 3402 Nikon Adapter Question

Date Added: 16th November 2009
Question: I have a Metz 45 CL-4 which I have been using with a Bronica ETRSi. Would the SCA 3402 enable me to use the flash with my D3 and D200 cameras, please?
Bristol Cameras Answer: Hi, if your 45 CL-4 isnt the Digital version then you couldnt use the SCA 3402 unfortunately. You would have to connect it up to your D200 / D3 via the 301 standard foot and the SCA 300A cable for basic auto/manual operation only. Only the lastest 45 CL-4 Digital would give you full TTL flash metering via the SCA 3402 adapter.
Metz SCA 3402 Nikon Adapter Question

Date Added: 15th November 2009
Question: Hi, I have a Metz 32 CT-3 fitted with a SCA 343 for my old Nikon FA, I now have a D90 what would I need if its even possible?
Bristol Cameras Answer: Hi, as the 32 CT-3 isnt a Digital compatible flashgun you would only be able to connect it to the Nikon D90 via the standard 301 foot for basic auto/manual operation.
Metz SCA 3402 Nikon Adapter Question

Date Added: 5th November 2009
Question: HI there Does this adapter allow me to use a Metz 45 CL-4 with a Nikon D90 or do I need to buy a CL-4 Digital? Thanks
Bristol Cameras Answer: Hi, you would need to purchase the CL-4 Digital to get TTL flash metering with the SCA 3402. With the non Digital 45 CL-4 you would only be able to use it with the D90 via the 301 standard foot and SCA 300A cable and get basic auto/manual operation.
Metz SCA 3402 Nikon Adapter Question

Date Added: 4th November 2009
Question: Hi. I have a Metz 40 MZ-3i and Nikon D200. Will the SCA 3402 work with it?.
Bristol Cameras Answer: Hi, as the 40 MZ-3i isnt a digital compatible flashgun you would only be able to use it with the D200 via the 301 standard foot for basic auto/manual operation.
Metz SCA 3402 Nikon Adapter Question

Date Added: 31st July 2009
Question: I have a Metz 50 MZ-5 and would like to use it with the Nikon D2X. So what suitable adapter could I use?
Bristol Cameras Answer: Hi, the 50 MZ-5 isnt compatible with D-SLR cameras unfortunately so you could only use the 301 standard foot. Only auto and manual modes would be usable, there would be no TTL.
Metz SCA 3402 Nikon Adapter Question

Date Added: 11th June 2009
Question: Hi. I got a Metz 54 MZ-3 for my Nikon D80. Which SCA 3402 version is going to work with my gear?
Bristol Cameras Answer: Hi, according to the Metz Germany site, you will require the SCA 3402 with a minimum of version M6 in order to work with your equipment.
Metz SCA 3402 Nikon Adapter Question

Date Added: 16th February 2009
Question: I have a Metz 70 MZ-5. Which SCA adapter will let me use this on a Nikon D200?
Bristol Cameras Answer: Hi, for that combination you will require the 3402 SCA adapter.
Metz SCA 3402 Nikon Adapter Question

Date Added: 17th October 2008
Question: Hello, I have a Metz 54 MZ4i with a SCA 3402 M3 adapter, will this work on the Nikon D80?
Bristol Cameras Answer: Hi, for full compatibility you will require the M6 (or later) version of the 3402 adapter, so the M3 version would not be suitable unfortunately.
Metz SCA 3402 Nikon Adapter Question

Date Added: 19th August 2008
Question: Hi, will this allow me to use my Metz 54 MZ-3 with my Nikon D300? (I previously had a EOS 40D, and used the SCA 3102 M3 for that).
Bristol Cameras Answer: Hi, yes the SCA 3402 is the correct adapter for the D300 and 54 MZ-3. When ordering online put in the comments box, must be M7 version, this will ensure proper compatibility with the D300.
Metz SCA 3402 Nikon Adapter Question

Date Added: 12th August 2008
Question: I have just replaced my aging Olympus E20P camera for a Nikon D300 and I want to continue using my Metz 54MZ-4 flashgun. Can you tell me which new SCA adapter I need to purchase please?
Bristol Cameras Answer: Hi, to connect the Metz 54 MZ-4 to the Nikon D300 you require the SCA 3402 adapter but when ordering pop in the comments box "MUST BE M7 VERSION". This will ensure full compatibility.
Metz SCA 3402 Nikon Adapter Question

Date Added: 31st August 2007
Question: I have a Metz 60CT-2 and a Nikon DX1. Does the SCA 3402 work with these?
Bristol Cameras Answer: I have spoken to Metz UK and they advise not to use the SCA adapters with that flashgun as the trigger voltage is too high even with the SCA adapter fitted, it would not be healthy for you and your camera. Your best bet is to look at the Metz 45 CL4 Digital if you prefer a hammerhead style flash.

Metz SCA 3402 Nikon Adapter Question

Question: Is the Metz SCA 3402 Nikon Adapter in stock?

Bristol Cameras Answer: As per most accessories listed on this website we do not have the resources to maintain stock info on several thousand smaller items. We keep many of the accessories on our site in stock and even if we don't have the Metz SCA 3402 Nikon Adapter in stock, it is likely that it will be available from suppliers within 2-3 working days.
Metz SCA 3402 Nikon Adapter Question

Question: How much does delivery of the Metz SCA 3402 Nikon Adapter cost?

Bristol Cameras Answer: This depends on the total value of your order and the shipping destination. For more information on delivery costs click here.
Metz SCA 3402 Nikon Adapter Question

Question: Can you send parcels to me outside of the UK?

Bristol Cameras Answer: Unfortunatley, as a fraud preventative measure we can only send your parcel to the registered card holders address which must be in the UK (including Northern Ireland and the Channel Islands), we do not send goods outside of the UK.
Ask Bristol Cameras a question about the Metz SCA 3402 Nikon Adapter

Please check any common questions above before posting as we may not reply to any questions that have been answered previously. We reserve the right to publish your question to this website for the future benefit of other users with similar queries. We may carry out minor editorial changes to the content. All FAQ's remain copyright Bristol Cameras.