Sea & Sea O-Ring Grease

Specification

O-rings are the most important component of your underwater camera system. If the O-ring is kept lubricated, it will be elastic enough to shape itself around the channel. If it is dry, there will be too much friction to allow it to reshape itself, therefore it will not safeguard against flooding.

Every time you open the camera to change film, memory card or batteries examine the O-ring and service if necessary.

• Always clean and lubricate the o-ring after every dive.
• When in doubt about the sealing capability of an O-ring, always discard and replace.
• Never use a sharp or pointed object to remove an O-ring, only an o-ring remover tool.
• Don't overgrease. Too much grease attracts debris that will disrupt the seal and cause flooding. Silicone grease is not a sealant, it only protects the O-ring from abrasion. A perfectly greased O-ring looks moist and shiny.

Images

Reviews

Write your own Sea & Sea O-Ring Grease Review


Reviewed by Linda Jones

Date Added: Monday 01 December, 2008

Hi, I have recently purchased this o-ring from you for my underwater housing. After going into high street stores looking for this, and going to many web sights I chose to buy from you as I was abe to purchase this item on its own, I found that in other places you had to order the o-rings as well which I didn't want. So I will be back with you again to order more thank you, Linda.

Rating: [5 of 5 Stars!]

FAQs

Ask Bristol Cameras a question about the Sea & Sea O-Ring Grease

Please check any common questions above before posting as we may not reply to any questions that have been answered previously. We reserve the right to publish your question to this website for the future benefit of other users with similar queries. We may carry out minor editorial changes to the content. All FAQ's remain copyright Bristol Cameras.

Sea & Sea O-Ring Grease Question

Date Added: 17th September 2008
Question: Can I use Sea & Sea grease on my Panasonic TZ3 housing (DMW-MCTZ3)?
Bristol Cameras Answer: Hi, yes either Sea & Sea or Olympus o-ring grease is fine for use with Panasonic underwater housing.
Sea & Sea O-Ring Grease Question

Date Added: 25th August 2008
Question: Can I use Sea & Sea silicone grease on my Fuji F30/F31fd housing?
Bristol Cameras Answer: Hi, yes this Sea & Sea o-ring grease is suitable for use with all Fuji underwater housings.

Sea & Sea O-Ring Grease Question

Question: Is the Sea & Sea O-Ring Grease in stock?

Bristol Cameras Answer: As per most accessories listed on this website we do not have the resources to maintain stock info on several thousand smaller items. We keep many of the accessories on our site in stock and even if we don't have the Sea & Sea O-Ring Grease in stock, it is likely that it will be available from suppliers within 2-3 working days.
Sea & Sea O-Ring Grease Question

Question: How much does delivery of the Sea & Sea O-Ring Grease cost?

Bristol Cameras Answer: This depends on the total value of your order and the shipping destination. For more information on delivery costs click here.
Sea & Sea O-Ring Grease Question

Question: Can you send parcels to me outside of the UK?

Bristol Cameras Answer: Unfortunatley, as a fraud preventative measure we can only send your parcel to the registered card holders address which must be in the UK (including Northern Ireland and the Channel Islands), we do not send goods outside of the UK.
Ask Bristol Cameras a question about the Sea & Sea O-Ring Grease

Please check any common questions above before posting as we may not reply to any questions that have been answered previously. We reserve the right to publish your question to this website for the future benefit of other users with similar queries. We may carry out minor editorial changes to the content. All FAQ's remain copyright Bristol Cameras.