Digital Cameras at Bristol Cameras
 
Home » Camera Accessories » Camera Film + Darkroom » Developing Chemistry » ADOX Atomal 49 B&W Film Developer (To Make 1000ml)
Available to order

ADOX Atomal 49 B&W Film Developer (To Make 1000ml)

ADOX Atomal 49 B&W Film Developer (To Make 1000ml) ADOX Atomal 49 is an extra-fine grain, compensating developer which offers both excellent use of film speed and high contrast control. The powder developer mixes to make 1 litre stock solution. The stock solution can be used for up to ten films, or further diluted for use a single-shot developer. Dilution makes temperature control easier, and as a single-use developer ATM 49 delivers precise, repeatable results on each roll of film. Stock solution can be kept in a fully filled container for upu to 6 weeks. Formerly known as Calbe A49.

New


£6.00
(Inc VAT)
You can also check: Accessories | Spec | Images | Reviews | FAQ |

Accessories

To buy compatible accessories for the ADOX Atomal 49 B&W Film Developer (To Make 1000ml), tick the box of the relevant accessory then scroll to the bottom of this section to add the item(s) to your cart.

Kaiser Accordion Bottle 1000ml:

Kaiser Accordion Bottle 1000ml

Accordion bottles are ideal for storing photo chemicals as the accordion like walls can be pressed together, reducing the height of the bottle and setting excess air free. This reduces the danger of oxidation and allows for longer storage of chemicals. With screw on cap. Black. Volume 550 to 1000ml.


£11.00
(Inc VAT)
Tick to add
Kood Straight Tank Thermometer:

Kood Straight Tank Thermometer

Kood straight tank thermometer, perfect for checking the temperature of chemicals during processing and developing. Temperature range of -15 to 50 degrees C. Ideal for most black and white processing. 13cm in length.


£4.50
(Inc VAT)
Tick to add
ADOX Labtime Mini Darkroom Timer:

ADOX Labtime Mini Darkroom Timer

The ADOX Labtime Mini can count up as well as down. You can measure the time which elapses until an event occurs (COUNT-UP) or let a pre-chosen time count down (TIMER) in order to stop a process when the countdown is over. On the right hand side the three functions can be reached by moving the main switch to CLOCK, COUNT-UP or TIMER. All three processes can be run simultaneously. You can switch between them. If a process is active the a symbol will light up on the LCD screen. In the TIMER mode you can save the time chosen with MEMORY in order to repeat the countdown over and over. In order to repeat a countdown you need to push three buttons only: STOP (stops the old countdown), MEMORY (operates the flyback to the memorised time) and START in order to start the new countdown. The four rubber feet on the backside of the LABTIME MINI make sure you can operate this with one hand only. When a countdown is finished an alarm will sound and an optical indicator will show (TIME S UP will be displayed). The LABTIME MINI will not stop at zero but rather start counting up in order to indicate the overshot amount of time in case you do not hear the alarm at first and come back late to your project. The alarm can be set dead on the backside of the LABTIME MINI if your processes are noise sensitive. The COUNT-UP function can be started by pressing START/STOP in COUNT-UP mode. With a second push on the START/STOP button the time is taken. Reset the stop clock with CLEAR to 0:0:00. The time is indicated in AM/PM format. When an alarm is ringing it can be stopped by pushing START/STOP. Set time: Push START/STOP in clock mode for about 2 seconds and the time will start blinking. Set the time with HR and MIN (check for AM or PM). Save the time by pushing START/STOP again. If you do not set a time the clock will automatically start running again after a few seconds.


£7.00
(Inc VAT)
Tick to add
ADOX Adoflo II Universal Wetting Agent 100ml:

ADOX Adoflo II Universal Wetting Agent 100ml

Highly concentrated wetting agent to encourage even water run off on the surfaces of all photo materials. Minimizes water spots, reduces the drying time, and helps create a streak free finish. The anti static properties prevents dust from clinging to the materials as they dry. It also improves the results of high gloss drying (replacement for Glanzol). Dilution 1+400 for photo paper and 1+700 for film. The bottle contents are sufficient for 166 liters of working solution. Diluted wetting agent should only be stored for a few days at most. 100 ml concentrate.


£5.99
(Inc VAT)
Tick to add

Specification

No Specification

Images

ADOX Atomal 49 B&W Film Developer (To Make 1000ml) Large

Reviews


Write your own ADOX Atomal 49 B&W Film Developer (To Make 1000ml) Review

Be the first to write a review about the ADOX Atomal 49 B&W Film Developer (To Make 1000ml)

FAQs

Ask Bristol Cameras a question about the ADOX Atomal 49 B&W Film Developer (To Make 1000ml)

Please check any common questions above before posting as we may not reply to any questions that have been answered previously. We reserve the right to publish your question to this website for the future benefit of other users with similar queries. We may carry out minor editorial changes to the content. All FAQ's remain copyright Bristol Cameras.


ADOX Atomal 49 B&W Film Developer (To Make 1000ml) Question

Question: Is the ADOX Atomal 49 B&W Film Developer (To Make 1000ml) in stock?

Bristol Cameras Answer: As per most accessories listed on this website we do not have the resources to maintain stock info on several thousand smaller items. We keep many of the accessories on our site in stock and even if we don't have the ADOX Atomal 49 B&W Film Developer (To Make 1000ml) in stock, it is likely that it will be available from suppliers within 2-3 working days.
ADOX Atomal 49 B&W Film Developer (To Make 1000ml) Question

Question: How much does delivery of the ADOX Atomal 49 B&W Film Developer (To Make 1000ml) cost?

Bristol Cameras Answer: This depends on the total value of your order and the shipping destination. For more information on delivery costs click here.
ADOX Atomal 49 B&W Film Developer (To Make 1000ml) Question

Question: Can you send parcels to me outside of the UK?

Bristol Cameras Answer: Unfortunately, we do not send goods outside of the UK.
Ask Bristol Cameras a question about the ADOX Atomal 49 B&W Film Developer (To Make 1000ml)

Please check any common questions above before posting as we may not reply to any questions that have been answered previously. We reserve the right to publish your question to this website for the future benefit of other users with similar queries. We may carry out minor editorial changes to the content. All FAQ's remain copyright Bristol Cameras.

Your Question:
Email:
Verify Email:
Spam protection:
What is 65+2
(Enter carefully - an incorrect answer will clear the form)
Newsletter Signup:
Shopping Cart Shopping Cart
Items in Basket
0 item(s)
Total cost of Items
£0.00
Facebook Like
Digital Camera Battery
Product Reviews

Olympus 9-18mm f4-5.6 M Zuiko Digital ED Micro Four Thirds Lens
Very nice lens - compact, lightweight, crisp and an ideal wide angle r...

Olympus 40-150mm F4-5.6 R M Zuiko ED Micro Four Thirds Black
I do mainly landscape work so I only use longer lenses infrequently. T...

Olympus 9mm F8 Micro Four Thirds Body Cap Lens Black
What a great little lens to have in the bag and it's so light you don'...

Disposable Raincover For DSLR With Flash (Pack Of 2)
This is a really good, simple product, more effective and professional...

Pentax 18-135mm F3.5-5.6 DA SMC WR Zoom Lens
Received my Lens the day after I ordered it from Bristol Cameras. Pric...

More Product Reviews

jet web design
.