Digital Cameras at Bristol Cameras
 
Home » Camera Accessories » Camera Film + Darkroom » Darkroom » ADOX Labtime Mini Darkroom Timer
Out of Stock

ADOX Labtime Mini Darkroom Timer

ADOX Labtime Mini Darkroom Timer The ADOX Labtime Mini can count up as well as down. You can measure the time which elapses until an event occurs (COUNT-UP) or let a pre-chosen time count down (TIMER) in order to stop a process when the countdown is over. On the right hand side the three functions can be reached by moving the main switch to CLOCK, COUNT-UP or TIMER. All three processes can be run simultaneously. You can switch between them. If a process is active the a symbol will light up on the LCD screen. In the TIMER mode you can save the time chosen with MEMORY in order to repeat the countdown over and over. In order to repeat a countdown you need to push three buttons only: STOP (stops the old countdown), MEMORY (operates the flyback to the memorised time) and START in order to start the new countdown. The four rubber feet on the backside of the LABTIME MINI make sure you can operate this with one hand only. When a countdown is finished an alarm will sound and an optical indicator will show (TIME S UP will be displayed). The LABTIME MINI will not stop at zero but rather start counting up in order to indicate the overshot amount of time in case you do not hear the alarm at first and come back late to your project. The alarm can be set dead on the backside of the LABTIME MINI if your processes are noise sensitive. The COUNT-UP function can be started by pressing START/STOP in COUNT-UP mode. With a second push on the START/STOP button the time is taken. Reset the stop clock with CLEAR to 0:0:00. The time is indicated in AM/PM format. When an alarm is ringing it can be stopped by pushing START/STOP. Set time: Push START/STOP in clock mode for about 2 seconds and the time will start blinking. Set the time with HR and MIN (check for AM or PM). Save the time by pushing START/STOP again. If you do not set a time the clock will automatically start running again after a few seconds.

New


£7.00
(Inc VAT)
You can also check: Spec | Images | Reviews | FAQ |

Specification

PDF ADOX Labtime Mini Darkroom Timer technical information download
  • The ADOX Labtime Mini can count up as well as down.
  • You can measure the time which elapses until an event occurs (COUNT-UP) or let a pre-chosen time count down (TIMER) in order to stop a process when the countdown is over.
  • On the right hand side the three functions can be reached by moving the main switch to CLOCK, COUNT-UP or TIMER.
  • All three processes can be run simultaneously and you can easily switch between them.
  • If a process is active the a symbol will light up on the LCD screen.
  • In the TIMER mode you can save the time chosen with MEMORY in order to repeat the countdown over and over.
  • In order to repeat a countdown you need to push three buttons only: STOP (stops the old countdown), MEMORY (operates the flyback to the memorised time) and START in order to start the new countdown.
  • The four rubber feet on the backside of the LABTIME MINI make sure you can operate this with one hand only.
  • When a countdown is finished an alarm will sound and an optical indicator will show (TIME S UP will be displayed).
  • The LABTIME MINI will not stop at zero but rather start counting up in order to indicate the overshot amount of time in case you do not hear the alarm at first and come back late to your project.
  • The alarm can be set dead on the backside of the LABTIME MINI if your processes are noise sensitive.
  • The COUNT-UP function can be started by pressing START/STOP in COUNT-UP mode.
  • With a second push on the START/STOP button the time is taken.
  • Reset the stop clock with CLEAR to 0:0:00.
  • The time is indicated in AM/PM format.
  • When an alarm is ringing it can be stopped by pushing START/STOP.
  • Set time: Push START/STOP in clock mode for about 2 seconds and the time will start blinking.
  • Set the time with HR and MIN (check for AM or PM).
  • Save the time by pushing START/STOP again.
  • If you do not set a time the clock will automatically start running again after a few seconds.

Images

ADOX Labtime Mini Darkroom Timer Large

Reviews


Write your own ADOX Labtime Mini Darkroom Timer Review

Be the first to write a review about the ADOX Labtime Mini Darkroom Timer

FAQs

Ask Bristol Cameras a question about the ADOX Labtime Mini Darkroom Timer

Please check any common questions above before posting as we may not reply to any questions that have been answered previously. We reserve the right to publish your question to this website for the future benefit of other users with similar queries. We may carry out minor editorial changes to the content. All FAQ's remain copyright Bristol Cameras.


ADOX Labtime Mini Darkroom Timer Question

Question: Is the ADOX Labtime Mini Darkroom Timer in stock?

Bristol Cameras Answer: We are sorry the ADOX Labtime Mini Darkroom Timer is not currently in stock and is difficult to obtain from suppliers at present.
ADOX Labtime Mini Darkroom Timer Question

Question: How much does delivery of the ADOX Labtime Mini Darkroom Timer cost?

Bristol Cameras Answer: This depends on the total value of your order and the shipping destination. For more information on delivery costs click here.
ADOX Labtime Mini Darkroom Timer Question

Question: Can you send parcels to me outside of the UK?

Bristol Cameras Answer: Unfortunately, we do not send goods outside of the UK.
Ask Bristol Cameras a question about the ADOX Labtime Mini Darkroom Timer

Please check any common questions above before posting as we may not reply to any questions that have been answered previously. We reserve the right to publish your question to this website for the future benefit of other users with similar queries. We may carry out minor editorial changes to the content. All FAQ's remain copyright Bristol Cameras.

Your Question:
Email:
Verify Email:
Spam protection:
What is 25+3
(Enter carefully - an incorrect answer will clear the form)
Newsletter Signup:
Shopping Cart Shopping Cart
Items in Basket
0 item(s)
Total cost of Items
£0.00
Facebook Like
Digital Camera Battery
Product Reviews

Reflecta Super 8 | Normal 8 Film Scanner Memory Bundle
Part 2 of review... 2. It is important to adjust the X-Y position of ...

Reflecta Super 8 | Normal 8 Film Scanner Memory Bundle
I have had this for10 days, using it to scan 50-60 4min. reels of stan...

Olympus LB-T01 Lens Barrier For Tough TG Series
bought this from Bristol Cameras to go with my TG-6. I felt even when ...

Ricoh CA-3 Cable Switch
...

Pentax Image Sensor Cleaning Kit (O-ICK1)
...

More Product Reviews

jet web design
.