Digital Cameras at Bristol Cameras
 
Home » Underwater Cameras » Underwater Accessories » Ikelite UW Accessories » Ikelite 1 Inch Sliding Ball Mount (4081.72)
Available to order

Ikelite 1 Inch Sliding Ball Mount (4081.72)

Ikelite 1 Inch Sliding Ball Mount (4081.72) FREE DELIVERY ON THIS ITEM - Mounts to Ball Arm Mark II Extensions for the addition of a lightweight accessory in the middle of your arm system. A three-pronged wing nut provides adjustability to slide your accessory up and down the length of the arm to reposition lighting easily during your dive. Requires a Ball Arm Mark II Extension, sold separately. The 1-inch Ball Arm System Mark II features 1-inch ball components with a groove and o-ring to prevent slippage for improved holding power with less force. While underwater, clamps may be finger-tightened to keep lighting in place yet allow repositioning without loosening the clamp. All parts are hard coat type III anodized for a long lasting, scratch resistant finish.

New


£39.00
(Inc VAT)

Free Shipping!
You can also check: Accessories | Spec | Images | Reviews | FAQ |

Accessories

To buy compatible accessories for the Ikelite 1 Inch Sliding Ball Mount (4081.72), tick the box of the relevant accessory then scroll to the bottom of this section to add the item(s) to your cart.

Ikelite 1 Inch Ball Arm Extension Mark II (7 Inch) (4081.07):

Ikelite 1 Inch Ball Arm Extension Mark II (7 Inch) (4081.07)

A rigid anodized aluminium arm with balls at each end to extend your strobe or video light arm. Add an extension and clamp to your existing strobe arm for reduced backscatter and more creative lighting effects when shooting with a wide angle lens. The slotted design allows for the attachment of a lightweight accessory in the middle of the extension. When used with our Sliding Ball Mount, the additional accessory is able to move up and down the length of the arm for quick repositioning during a dive. Works with 1 inch ball arms from Ikelite, TLC, Ultralight, Nauticam and others. Old and new Ikelite 1 inch balls and clamps are interchangeable. For the best performance, we recommend combining like components within a single clamp (two balls with grooves, or two balls without grooves). Ball components with an o-ring groove should have an o-ring installed at all times.


£49.00
(Inc VAT)
Tick to add

Specification

  • Mounts to Ball Arm Mark II Extensions for the addition of a lightweight accessory in the middle of your arm system.
  • A three-pronged wing nut provides adjustability to slide your accessory up and down the length of the arm to reposition lighting easily during your dive.
  • Requires a Ball Arm Mark II Extension, sold separately.
  • The 1-inch Ball Arm System Mark II features 1-inch ball components with a groove and o-ring to prevent slippage for improved holding power with less force.
  • While underwater, clamps may be finger-tightened to keep lighting in place yet allow repositioning without loosening the clamp.
  • All parts are hard coat type III anodized for a long lasting, scratch resistant finish.

Images

Ikelite 1 Inch Sliding Ball Mount (4081.72) Large

Reviews


Write your own Ikelite 1 Inch Sliding Ball Mount (4081.72) Review

Be the first to write a review about the Ikelite 1 Inch Sliding Ball Mount (4081.72)

FAQs

Ask Bristol Cameras a question about the Ikelite 1 Inch Sliding Ball Mount (4081.72)

Please check any common questions above before posting as we may not reply to any questions that have been answered previously. We reserve the right to publish your question to this website for the future benefit of other users with similar queries. We may carry out minor editorial changes to the content. All FAQ's remain copyright Bristol Cameras.


Ikelite 1 Inch Sliding Ball Mount (4081.72) Question

Question: Is the Ikelite 1 Inch Sliding Ball Mount (4081.72) in stock?

Bristol Cameras Answer: As per most accessories listed on this website we do not have the resources to maintain stock info on several thousand smaller items. We keep many of the accessories on our site in stock and even if we don't have the Ikelite 1 Inch Sliding Ball Mount (4081.72) in stock, it is likely that it will be available from suppliers within 2-3 working days.
Ikelite 1 Inch Sliding Ball Mount (4081.72) Question

Question: How much does delivery of the Ikelite 1 Inch Sliding Ball Mount (4081.72) cost?

Bristol Cameras Answer: This depends on the total value of your order and the shipping destination. For more information on delivery costs click here.
Ikelite 1 Inch Sliding Ball Mount (4081.72) Question

Question: Can you send parcels to me outside of the UK?

Bristol Cameras Answer: Unfortunately, we do not send goods outside of the UK.
Ask Bristol Cameras a question about the Ikelite 1 Inch Sliding Ball Mount (4081.72)

Please check any common questions above before posting as we may not reply to any questions that have been answered previously. We reserve the right to publish your question to this website for the future benefit of other users with similar queries. We may carry out minor editorial changes to the content. All FAQ's remain copyright Bristol Cameras.

Due to staff absence, FAQs are currently suspended. If you have an urgent question or want to check stocks please give the store a ring on either 01179 290435 or 01179 140089. Thank you.

Newsletter Signup:
Shopping Cart Shopping Cart
Items in Basket
0 item(s)
Total cost of Items
£0.00
Facebook Like
Digital Camera Battery
Product Reviews

Reflecta Super 8 | Normal 8 Film Scanner Memory Bundle
Part 2 of review... 2. It is important to adjust the X-Y position of ...

Reflecta Super 8 | Normal 8 Film Scanner Memory Bundle
I have had this for10 days, using it to scan 50-60 4min. reels of stan...

Olympus LB-T01 Lens Barrier For Tough TG Series
bought this from Bristol Cameras to go with my TG-6. I felt even when ...

Ricoh CA-3 Cable Switch
...

Pentax Image Sensor Cleaning Kit (O-ICK1)
...

More Product Reviews

jet web design
.