Digital Cameras at Bristol Cameras
 
Home » Underwater Cameras » Ikelite Canon Housings » Ikelite Underwater Housing For Canon PowerShot G1 X Mark III
Available to order

Ikelite Underwater Housing For Canon PowerShot G1 X Mark III

Ikelite Underwater Housing For Canon PowerShot G1 X Mark III FREE DELIVERY ON THIS ITEM - A compact, full-featured underwater TTL housing for the Canon PowerShot G1 X Mark III camera. This system is suitable for scuba, snorkel, surf, pool, and any application in or around the water. An integrated TTL circuit is fine-tuned to the latest Canon flash exposure protocol for the most accurate exposure possible with the Canon PowerShot G1 X Mark III camera. The circuit is powered by the strobe for zero maintenance and no batteries to change. Exposure compensation in TTL mode is supported using the cameras built-in control.

A fast and reliable strobe connection is essential to getting the shot underwater. This housing provides a direct electrical connection to the cameras external flash hot shoe. Cord attachment is as easy as screwing in a lightbulb, and the threaded fit prevents accidental detachment during use. The bulkhead connection has been moved to the top of the housing to keep cords out of your way and reduce strain on the cord ends. A variety of sync cord terminations are available for Ikelite, Sea and Sea, Inon or Nikonos strobes for ultimate versatility. At this time, only Ikelite DS strobes are capable of powering and communicating with the TTL circuit. Sea amd Sea, Inon and Nikonos strobes will still enjoy fast recycle times and improved battery life, but must be used in manual exposure modes only. Two fibre optic ports are built into the front of the housing provide an attachment point for fiber optic cords from most major manufacturers. The camera's built-in flash is suitable for firing an external strobe, but not for lighting a photo underwater. Use of a fiber optic connector requires the camera's built-in flash to fire, bypassing the TTL functionality of the housing.

Controls are provided for all important camera features. A new curved shutter lever feels natural and responsive. Knob controls are upgraded to our new soft-touch design which gives you extra grip and feels good whether you're diving with gloves or bare hands. Our push buttons have been redesigned to reduce weight and salt build-up. The back of the housing features laser engraved control symbols which will never fade or fall off. Control placement mimics the way you use the camera on the surface to take advantage of muscle memory and avoid the need to re-learn your camera's controls. The camera mount is front-loading for easy installation and removal. A small mounting plate attaches to the bottom of the camera and secures in the front of the housing. The mounting plate features a 1/4-20 threaded mount on the bottom so that it can be attached to a tripod on the surface. There are two 1/4-20 mounts on the bottom of the housing for secure, rotation-free mounting of an optional tray and handles.

The 3 inch diameter glass lens port features a 67mm thread on the front for the easy attachment of external wide angle and macro wet lenses. Wide angle lenses make objects appear smaller, so that you can fit more into your frame underwater. Macro close-up lenses make small objects appear larger, so that tiny creatures will fill your frame.

The optional Vacuum Kit # 47012 may be installed in place of the spare accessory port on the side of the housing. A vacuum system allows you to pressurize the housing to check for leaks prior to putting your expensive equipment in the water. Combined with a full view of the camera and o-ring seal through the back of the housing, there is no greater assurance that your gear will be safe.

The new white ABS-PC blend front is stronger than its clear counterpart, provides improved contrast and visibility, and keeps your camera running cooler in the sun. This material is 1/3 of the specific gravity of aluminum, making the housing much lighter and fundamentally corrosion free. The unique rear seal design prevents accidental twisting or stretching of the o-ring for simple and confident assembly. We have eliminated the need for an o-ring groove or channel which can trap sand, dirt, or debris. Two double-passivated stainless steel locking lid snaps are simple to use and virtually unbreakable. The clear back allows you to see the o-ring form a solid, watertight seal as it closes.

Please note the warranty on underwater housings does not cover damage to your camera caused by water ingress. It is your responsibility to insure your equipment with a specialist underwater equipment insurance company, click here for a quote.

New


£659.00
(Inc VAT)

Free Shipping!
Finance Available!
SELECT FINANCE OPTIONS
Case Price: £0.00
Deposit: £0.00
Number of Repayments: 0
APR: 0%
Amount of Loan: £0.00
Consumer Monthly Repayment: £0.00
Consumer Amount Repayable: £0.00
Consumer Charge for Credit: £0.00
Retailer Subsidy: £0.00
You can also check: Accessories | Spec | Images | Reviews | FAQ |

Accessories

To buy compatible accessories for the Ikelite Underwater Housing For Canon PowerShot G1 X Mark III, tick the box of the relevant accessory then scroll to the bottom of this section to add the item(s) to your cart.

Ikelite 0110 Replacement O-Ring:

Ikelite 0110 Replacement O-Ring

Replacement o-ring for various Ikelite underwater housings. An essential spare part for your underwater housing to have in your equipment bag on any dive trip in case the one in your housing cracks or is damaged as the o-ring gives the housing its water resistance.


£13.00
(Inc VAT)
Tick to add
Ikelite UR Pro Push Fit Blue Water Correction Filter - 3.0 Inch:

Ikelite UR Pro Push Fit Blue Water Correction Filter - 3.0 Inch

Push fit underwater colour correction filter for underwater housings and wide angle attachment lenses. 3.0 inch (7.6cm) size suitable for port diameters of 72-78mm. This orange filter is suitable for blue tropical waters such as the Red Sea. Enhances the colour balance in video or stills natural light photography. Usable to a depth of approx 24m (depends on sufficient available light).


£64.00
(Inc VAT)
Tick to add
Ikelite UR Pro Push Fit Green Water Correction Filter - 3.0 Inch:

Ikelite UR Pro Push Fit Green Water Correction Filter - 3.0 Inch

Push fit underwater colour correction filter for underwater housings and wide angle attachment lenses. 3.0 inch (7.6cm) size suitable for port diameters of 72-78mm. This magenta filter is suitable for green waters such as found in the UK and Atlantic. Enhances the colour balance in video or stills natural light photography. Usable to a depth of approx 24m (depends on sufficient available light).


£65.00
(Inc VAT)
Tick to add
Fantasea SharpEye M67 +4 Lens:

Fantasea SharpEye M67 +4 Lens

Macro conversion lens for underwater housings with a 67mm filter thread (M67) on the lens port. Maximum depth rating of 60 metres (200 feet). Perfect for shooting close ups of fish and corals. The SharpEye magnifies the subject and enables the camera to focus to a shorter distance. Can be mounted and removed whilst underwater.


£219.00
(Inc VAT)
Tick to add
Fantasea RedEye M67 67mm Red Filter:

Fantasea RedEye M67 67mm Red Filter

This red 67mm filter enhances the quality of both still and video images underwater when not using an artificial light source. The filter is attached to the filter thread and can be attached and removed whilst underwater. It is compatible with any underwater housings with a 67mm filter thread.


£85.00
(Inc VAT)
Tick to add
Kood Underwater Filter 67mm Blue Water:

Kood Underwater Filter 67mm Blue Water 67mm Orange Filter For Use Underwater In Cyan Or Blue Water Such As The Tropics, the Med and the Red Sea.
£18.00
(Inc VAT)
Tick to add
Kood Underwater Filter 67mm Green Water:

Kood Underwater Filter 67mm Green Water 67mm Magenta Filter For Use Underwater In Green Water Such As The Atlantic.
£20.00
(Inc VAT)
Tick to add
Inon UWL-H100 Type 1 M67 Wide Angle Conversion Lens:

Inon UWL-H100 Type 1 M67 Wide Angle Conversion Lens

The Inon UWL-H100 is a wide angle conversion lens with a M67 (67mm) filter thread. Designed for cameras with a 28mm (35mm equivalent) wide angle lens setting. Field of view of 100.8 degrees underwater and 179 degrees in air (depending on camera and housing). Magnification of 0.6x. High quality construction with 4 elements and 4 groups with optical glass with anti reflection coatings. Depth rated to 60 metres. Type 1 fitting with a protruding rear element suitable for most Ikelite, Olympus PT-050, PT-054, Canon WP-V1 and WP-V2 housings.


£369.00
(Inc VAT)
Tick to add
Ikelite Dual Handle Tray (9523.64):

Ikelite Dual Handle Tray (9523.64)

Dual handle and tray assembly which is suitable for Ikelite Compact Digital and Ultra Compact Digital still housings plus housings from Canon, Panasonic, Olympus and Sony. Dual handles provide greater stability underwater and also provides attachment points for external lighting and accessories. Hard coat anodised aluminium tray with comfortable rubberised handle grips. 114g lighter than the previous model (9523.62). Mounting points and hardware are provided for both Ikelite and non Ikelite housings for compact digital cameras. One button quick release allows easy attachment and removal of arm components. Ikelite housings below serial number 37100 with male threaded tray mounting bolts on the bottom require 9523.09 Tray Spacer, sold separately.


£121.00
(Inc VAT)
Tick to add
Ikelite 4103.51 Single TTL Sync Cord:

Ikelite 4103.51 Single TTL Sync Cord

This Ikelite 4103.51 TTL sync cord is used to attach an Ikelite underwater housing to a TTL Ikelite DS Substrobe (ICS5 to ICS5). These latest TTL sync cords can only be used with TTL DS series Substrobes, do not connect a non TTL strobe using this cord.


£97.00
(Inc VAT)
Tick to add
Ikelite 4103.52 Dual TTL Sync Cord:

Ikelite 4103.52 Dual TTL Sync Cord

This Ikelite 4103.52 TTL sync cord is used to attach an Ikelite underwater housing to a dual TTL Ikelite DS Substrobe setup. These latest TTL sync cords can only be used with TTL DS series Substrobes, do not connect a non TTL strobe using this cord.


£149.00
(Inc VAT)
Tick to add
Ikelite Sync Cord For Sea & Sea | Inon Strobes (4118.1):

Ikelite Sync Cord For Sea & Sea | Inon Strobes (4118.1)

Ikelite coiled sync cord with an Ikelite-style plug on the housing end and Sea & Sea / Inon style plugs on the strobe ends. The Ikelite style plug is widely recognised as the most reliable waterproof strobe sync connection available. Built-in strain reliefs reduce stress on cord ends. Sea & Sea / Inon strobes are unable to power the TTL circuitry in Ikelite housings, therefore these strobes will operate in manual exposure setting only. TTL communication through Ikelite housings is not supported by Sea & Sea / Inon strobes. To connect two strobes to a single housing bulkhead, use the Dual Sync Cord instead (4118.2).


£105.00
(Inc VAT)
Tick to add
Ikelite Dual Sync Cord For Sea & Sea | Inon Strobes (4118.2):

Ikelite Dual Sync Cord For Sea & Sea | Inon Strobes (4118.2)

Ikelite Y-shaped sync cord with an Ikelite-style plug on the housing end and Sea & Sea / Inon style plugs on the strobe ends. The Ikelite style plug is widely recognised as the most reliable waterproof strobe sync connection available. Built-in strain reliefs reduce stress on cord ends. Sea & Sea / Inon strobes are unable to power the TTL circuitry in Ikelite housings, therefore these strobes will operate in manual exposure setting only. TTL communication through Ikelite housings is not supported by Sea & Sea / Inon strobes. This cord requires the attachment of two strobes for waterproof operation. To shoot with only one strobe, try a single sync cord instead.


£155.00
(Inc VAT)
Tick to add
Ikelite Flex Arm For DS51 (4087.21):

Ikelite Flex Arm For DS51 (4087.21)

One of our most popular strobe arms pre-assembled and ready to be attached to your DS50 or DS51 strobe. A great start to any system, providing flexibility to shoot both wide angle and macro photography. Includes flex ball at release handle, flex ball at Micro Tray or DSLR top mount, 12 pieces of 3/4 flex arm extension and mount at DS50 or DS51 type strobe.


£52.00
(Inc VAT)
Tick to add
Ikelite DS51 Substrobe 4044.1 (Head Only):

Ikelite DS51 Substrobe 4044.1 (Head Only)

The Ikelite DS51 is a compact and lightweight strobe which is ideal for the travelling underwater photographer. Depth rated to 90 metres (300 feet). You can easily switch between TTL / Auto and any of the 6 manual power settings via a large, easy to adjust dial on the back of the strobe. Full recycle in 3.5 seconds (much shorter when not shooting at full power). There are a variety of arms and cords available separately to suit your housing. Powered by 4x AA batteries.


£399.00
(Inc VAT)
Tick to add
Ikelite Compact Ball Arm For Quick Release Handle (4080.05):

Ikelite Compact Ball Arm For Quick Release Handle (4080.05)

This is a great choice to mount almost any strobe or video light to an Ikelite quick release handle. The single segment arm is compact and lightweight, especially good for macro work. Additional extensions and clamps can be added (sold separately). Ikelite 1-inch ball components feature a groove and o-ring to prevent slippage for improved holding power with less force. While underwater, clamps may be finger-tightened to keep lighting in place yet allow repositioning without loosening the clamp. All parts are hard coat type III anodized for a long lasting, scratch resistant finish. Ikelite 1-inch ball components are compatible with most 1-inch arm system components from Aquatica TLC, Ultralight, Sea and Sea, Inon, Nauticam, and others. The slotted arm sections provide opportunities to mount an additional lightweight accessory almost anywhere along the length of an arm by adding a Sliding Ball Mount. The auxiliary clamps at the bottom of the arm provide an additional mounting location for a focus light or to attach a top handle if using two arms.


£165.00
(Inc VAT)
Tick to add
Ikelite DS160 Strobe NiMh (4060UK):

Ikelite DS160 Strobe NiMh (4060UK)

The Ikelite DS160 is a powerful underwater strobe which provides the most colourful and natural wide angle lighting on the market. Depth rated to 100 metres (328 feet). Professional grade round xenon flash tube and powder coated reflector produce a soft, stunningly warm 4800K light. Built in modeling light automatically turns off and back on when taking a still photo to avoid over exposure. A high capacity NiMh rechargeable battery pack provides longevity and rapid firing that no current set of AA batteries can provide. 10 1/2 stop manual control increments. Guide number of 24 at 1 metre / ISO 100. Approx 225 full flashes per charge. 1.5 second recycle time at full power. Ikelite ICS 5 pin bulkhead electrical sync connection. Comes complete with DS160 strobe, 4066.5 rechargeable NiMh battery pack, 0591.4 battery pack cover, smart charger, 0591.3 diffuser, 4081.4 1 inch ball mount, waterproof bulkhead cap and 1cc tube of silicone lubricant.


£715.00
(Inc VAT)
Tick to add

Specification

Box Contents:

  • Housing
  • O-ring # 0110
  • Vinyl port cover # 0200
  • Waterproof bulkhead cap # 9104.5

Specifications:

  • Depth rating: 200 feet / 60 metres
  • All important camera functions are accessible
  • Controls are not provided for the Wi-Fi button or Diopter adjustment control
  • Ikelite bulkhead connector with built-in TTL circuitry
  • 1/4-20 thread tray mounting with 3" (76 mm) spacing
  • 3.0 inch diameter glass lens port with 67mm threaded front
  • Slightly negative buoyancy in fresh water
  • 2.9 lb (1315 g) 6 x 5.7 x 7.3" (152 x 145 x 185 mm)

Images

Ikelite Underwater Housing For Canon PowerShot G1 X Mark III Large

Reviews


Write your own Ikelite Underwater Housing For Canon PowerShot G1 X Mark III Review

Be the first to write a review about the Ikelite Underwater Housing For Canon PowerShot G1 X Mark III

FAQs

Ask Bristol Cameras a question about the Ikelite Underwater Housing For Canon PowerShot G1 X Mark III

Please check any common questions above before posting as we may not reply to any questions that have been answered previously. We reserve the right to publish your question to this website for the future benefit of other users with similar queries. We may carry out minor editorial changes to the content. All FAQ's remain copyright Bristol Cameras.


Ikelite Underwater Housing For Canon PowerShot G1 X Mark III Question

Question: Is the Ikelite Underwater Housing For Canon PowerShot G1 X Mark III in stock?

Bristol Cameras Answer: As per most accessories listed on this website we do not have the resources to maintain stock info on several thousand smaller items. We keep many of the accessories on our site in stock and even if we don't have the Ikelite Underwater Housing For Canon PowerShot G1 X Mark III in stock, it is likely that it will be available from suppliers within 2-3 working days.
Ikelite Underwater Housing For Canon PowerShot G1 X Mark III Question

Question: How much does delivery of the Ikelite Underwater Housing For Canon PowerShot G1 X Mark III cost?

Bristol Cameras Answer: This depends on the total value of your order and the shipping destination. For more information on delivery costs click here.
Ikelite Underwater Housing For Canon PowerShot G1 X Mark III Question

Question: Can you send parcels to me outside of the UK?

Bristol Cameras Answer: Unfortunately, we do not send goods outside of the UK.
Ask Bristol Cameras a question about the Ikelite Underwater Housing For Canon PowerShot G1 X Mark III

Please check any common questions above before posting as we may not reply to any questions that have been answered previously. We reserve the right to publish your question to this website for the future benefit of other users with similar queries. We may carry out minor editorial changes to the content. All FAQ's remain copyright Bristol Cameras.

Your Question:
Email:
Verify Email:
Spam protection:
What is 7+5
(Enter carefully - an incorrect answer will clear the form)
Newsletter Signup:
Shopping Cart Shopping Cart
Items in Basket
0 item(s)
Total cost of Items
£0.00
Facebook Like
Digital Camera Battery
Product Reviews

Reflecta Super 8 | Normal 8 Film Scanner Memory Bundle
Part 2 of review... 2. It is important to adjust the X-Y position of ...

Reflecta Super 8 | Normal 8 Film Scanner Memory Bundle
I have had this for10 days, using it to scan 50-60 4min. reels of stan...

Olympus LB-T01 Lens Barrier For Tough TG Series
bought this from Bristol Cameras to go with my TG-6. I felt even when ...

Ricoh CA-3 Cable Switch
...

Pentax Image Sensor Cleaning Kit (O-ICK1)
...

More Product Reviews

jet web design
.