Digital Cameras at Bristol Cameras
 
Home » Underwater Cameras » Ikelite Olympus Housings » Ikelite Underwater Housing For Olympus E-M1 Mark II (6952.02)
Available to order

Ikelite Underwater Housing For Olympus E-M1 Mark II (6952.02)

Ikelite Underwater Housing For Olympus E-M1 Mark II (6952.02) FREE DELIVERY ON THIS ITEM - Ikelite underwater housing suitable for the Olympus OM-D E-M1 Mark II mirrorless digital camera model. Perfect for any wet environment including surf, dive and pool use. Lens port is not included. Supremely functional for maximum creative control - access is provided for all important camera functions (controls are not provided for diopter adjustment control, one touch white balance button, preview button and mode dial lock). The controls are laser etched into the back and will never fade or fall off. The shutter lever has been updated to a more sensitive and natural feeling curved design. The cameras large super bright LCD screen is viewable edge to edge through the back of the housing. A Supereye viewfinder is included for a clear view of the cameras EVF underwater. The new ABS-PC blend provides strength and corrosion free performance with minimal maintenance. The new white colour helps to deflect the sun to keep the camera running cooler for longer and also provides a superior contrast for an enhanced view of the camera, LCD screen and o-ring seal. An integrated TTL circuit is fine tuned to the latest Olympus flash exposure protocol for the most accurate exposure possible when used with Ikelite DS series strobes. As the Olympus OM-D E-M1 Mark II camera does not feature a built in flash triggering of fibre optic strobes is not supported at this time, a strobe must be connected by an electrical sync cord. A bright constant on video light can be used instead or in addition to a flash. Although not as bright as a strobe flash a constant on light provides added versatility because they can be used for focus assist and for improved colours when shooting video. The front loading camera mount plate makes installation and removal quick and easy and does not need to be removed for battery or memory card access. Slightly negative buoyancy in fresh water (actual buoyancy varies depending on choice of lens and port). To check which DLM type B port you require please click here. Lens ports can be found on our website here. Please note the warranty on underwater housings does not cover damage to your camera caused by water ingress. It is your responsibility to insure your equipment with a specialist underwater equipment insurance company, click here for a quote.

New


£1,149.00
(Inc VAT)

Free Shipping!
Finance Available!
SELECT FINANCE OPTIONS
Case Price: £0.00
Deposit: £0.00
Number of Repayments: 0
APR: 0%
Amount of Loan: £0.00
Consumer Monthly Repayment: £0.00
Consumer Amount Repayable: £0.00
Consumer Charge for Credit: £0.00
Retailer Subsidy: £0.00
You can also check: Accessories | Spec | Images | Reviews | FAQ |

Accessories

To buy compatible accessories for the Ikelite Underwater Housing For Olympus E-M1 Mark II (6952.02), tick the box of the relevant accessory then scroll to the bottom of this section to add the item(s) to your cart.

Ikelite 0110 Replacement O-Ring:

Ikelite 0110 Replacement O-Ring

Replacement o-ring for various Ikelite underwater housings. An essential spare part for your underwater housing to have in your equipment bag on any dive trip in case the one in your housing cracks or is damaged as the o-ring gives the housing its water resistance.


£13.00
(Inc VAT)
Tick to add
Ikelite DS51 Substrobe 4044.1 (Head Only):

Ikelite DS51 Substrobe 4044.1 (Head Only)

The Ikelite DS51 is a compact and lightweight strobe which is ideal for the travelling underwater photographer. Depth rated to 90 metres (300 feet). You can easily switch between TTL / Auto and any of the 6 manual power settings via a large, easy to adjust dial on the back of the strobe. Full recycle in 3.5 seconds (much shorter when not shooting at full power). There are a variety of arms and cords available separately to suit your housing. Powered by 4x AA batteries.


£399.00
(Inc VAT)
Tick to add
Ikelite DS160 Strobe NiMh (4060UK):

Ikelite DS160 Strobe NiMh (4060UK)

The Ikelite DS160 is a powerful underwater strobe which provides the most colourful and natural wide angle lighting on the market. Depth rated to 100 metres (328 feet). Professional grade round xenon flash tube and powder coated reflector produce a soft, stunningly warm 4800K light. Built in modeling light automatically turns off and back on when taking a still photo to avoid over exposure. A high capacity NiMh rechargeable battery pack provides longevity and rapid firing that no current set of AA batteries can provide. 10 1/2 stop manual control increments. Guide number of 24 at 1 metre / ISO 100. Approx 225 full flashes per charge. 1.5 second recycle time at full power. Ikelite ICS 5 pin bulkhead electrical sync connection. Comes complete with DS160 strobe, 4066.5 rechargeable NiMh battery pack, 0591.4 battery pack cover, smart charger, 0591.3 diffuser, 4081.4 1 inch ball mount, waterproof bulkhead cap and 1cc tube of silicone lubricant.


£715.00
(Inc VAT)
Tick to add
Ikelite DS161 Strobe NiMh (4061UK):

Ikelite DS161 Strobe NiMh (4061UK)

The Ikelite DS161 is a powerful underwater strobe which is one of the brightest strobes on the market. Depth rated to 100 metres (328 feet). Built in video / modelling light which automatically shuts off when the flash fires to avoid over exposing the image. You can easily switch between TTL and any of the 10 manual power settings via a large, easy to adjust dial. Full recycle in 1.5 seconds (much shorter when not shooting at full power). There are a variety of arms and cords available separately to suit your housing. Powered by a 7.2V 3300mAh NiMh rechargeable battery pack with easy to use quick release toggle system. Comes complete with DS161 strobe, NiMh rechargeable battery pack, battery pack cover, smart charger for NiMh, diffuser, 1 inch ball mount, waterproof bulkhead cap and silicone lubricant.


£850.00
(Inc VAT)
Tick to add
Ikelite Shutter Trigger Extension (4077.93):

Ikelite Shutter Trigger Extension (4077.93)

Extends the shutter lever away from the housing and closer to a right-hand handle. For use only with housings featuring a curved shutter lever.


£16.00
(Inc VAT)
Tick to add
Ikelite Tray + Single Quick Release Handle (9523.63):

Ikelite Tray + Single Quick Release Handle (9523.63)

Single handle and tray assembly which is suitable for Ikelite Compact Digital and Ultra Compact Digital still housings. Also fits non Ikelite housings, such as those from Canon, Panasonic, Olympus and Sony, which feature a central 1/4-20 bottom mount. Hard coat anodised aluminium tray with comfortable rubberised handle grips. Mounting points and hardware are provided for both Ikelite and non-Ikelite housings for compact digital cameras. A central 1/4-20 threaded mounting point allows for the attachment of a tripod directly to the bottom of the tray. The Ikelite Quick Release handle has become a favourite over the years for attachment and release of your lighting arm at the touch of a button. The tray with release handle comes with the necessary hardware to mount to Ikelite housings featuring female mounting points with 3 inch (76mm) spacing. Ikelite housings below serial number 37100 with male threaded tray mounting bolts on the bottom require 9523.09 Tray Spacer, sold separately.


£85.00
(Inc VAT)
Tick to add
Ikelite Dual Handle Tray (9523.64):

Ikelite Dual Handle Tray (9523.64)

Dual handle and tray assembly which is suitable for Ikelite Compact Digital and Ultra Compact Digital still housings plus housings from Canon, Panasonic, Olympus and Sony. Dual handles provide greater stability underwater and also provides attachment points for external lighting and accessories. Hard coat anodised aluminium tray with comfortable rubberised handle grips. 114g lighter than the previous model (9523.62). Mounting points and hardware are provided for both Ikelite and non Ikelite housings for compact digital cameras. One button quick release allows easy attachment and removal of arm components. Ikelite housings below serial number 37100 with male threaded tray mounting bolts on the bottom require 9523.09 Tray Spacer, sold separately.


£121.00
(Inc VAT)
Tick to add
Ikelite DLM 8 Inch Dome Port (5516.81):

Ikelite DLM 8 Inch Dome Port (5516.81)

A new acetyl base allows the dome port to attach directly to a compatible housing with DLM port system and weighs only slightly more than the smaller diameter 6 inch dome ports. The injection molded acrylic 8 inch diameter dome is specifically designed for underwater photography to provide superior optical performance. This dome provides image quality virtually indistinguishable from glass yet several pounds lighter and easier to handle, especially at the surface of the water. Compared to smaller 4 inch and 6 inch diameter domes, the larger dome reduces edge distortion on pictures taken with certain super wide angle lenses and makes shooting over under shots (half in, half out of the water) easier. Domes are ideal underwater for shooting wide angle and zoom lenses. If you are shooting a macro lens, we recommend using the a flat port instead. For use with compatible housings featuring DLM/A, DLM/B, and DLM/C port systems. This dome port cannot be used with DL or FL port systems. External filters are not compatible with dome ports. Look for filters that attach to your lens prior to installation, such as Magic Filters.

To check which DLM port you require for your lens please click here.


£425.00
(Inc VAT)
Tick to add
Ikelite DLM 1.2 Inch Port Extension (5516.65):

Ikelite DLM 1.2 Inch Port Extension (5516.65)

The Ikelite 5516.65 is a DLM series port extension suitable for Ikelite mirrorless series underwater housings. This will extend of mirrorless lens port by 1.2 inches (30mm). Allows you to fit and use a longer lens. Comes complete with spare securing screws and 1cc tube of silicone lubricant.

To check which DLM port you require for your lens please click here.


£169.00
(Inc VAT)
Tick to add
Ikelite DLM 6 Inch Dome Port With Zoom Control (5516.15):

Ikelite DLM 6 Inch Dome Port With Zoom Control (5516.15)

The Ikelite 5516.15 is a DLM series 6 inch dome port with zoom control suitable for Ikelite mirrorless series underwater housings. This optical grade 6 inch diameter dome allows you to fully take advantage of your lens. Compared to glass, the acrylic front element makes it much lighter in weight and easy to pack. The zoom sleeves are simple and affordable, easy to use and allows you to travel with a variety of lenses. For most lenses, simply install the zoom sleeve between the port and the housing. Then slide your camera in the housing with the lens attached. Zoom sleeves are particular to the lens for proper operation, use the link in the specification below for information on which zoom sleeve you need for your lens. Comes complete with neoprene cover, spare securing screws, spare o-ring and 1cc tube of silicone lubricant.

To check which DLM port and zoom sleeve you require please click here.


£329.00
(Inc VAT)
Tick to add
Ikelite DLM Adapter For 8 Inch Dome (5516.80):

Ikelite DLM Adapter For 8 Inch Dome (5516.80)

The Ikelite 5516.80 is an adapter which allows for the attachment of a Modular 8 inch dome to any Ikelite housing for a compact DSLR or mirrorless camera. The 8-inch dome (not included) is specially designed for underwater photography and is injection moulded out of optical grade acrylic. The diameter of the dome provides sharper photos corner-to-corner, while the large surface area of the dome makes shooting over-unders (half-in, half-out of the water) easier. The dome needs be very close to the front of the housing to provide the best images possible with super wide angle lenses. The proximity of the port to the housing precludes the use of zoom function when using this adapter so lenses must be used at a fixed focal length. Comes complete with spare securing screws and 1cc tube of silicone lubricant.

To check which DLM port you require for your lens please click here.


£149.00
(Inc VAT)
Tick to add
Ikelite DLM Extended Flat Port (5516.50):

Ikelite DLM Extended Flat Port (5516.50)

The Ikelite 5516.50 is a DLM series extended flat port suitable for Ikelite mirrorless series underwater housings. A large diameter, extended length flat port for use with larger macro lenses and Ikelite Mirrorless or Compact DSLR Housings. A 67mm threaded front allows for the attachment of external macro lenses or diopters. Recommended when using the Canon 60mm macro with the Ikelite housing for Canon EOS 100D. This port can also be combined with the DLM 2.2 Inch Port Extension to use the Canon 100mm IS USM macro lens. Comes complete with neoprene cover, spare securing screws, spare o-ring and 1cc tube of silicone lubricant.

To check which DLM port you require for your lens please click here.


£235.00
(Inc VAT)
Tick to add
Ikelite DLM Standard Flat Port (5516.45):

Ikelite DLM Standard Flat Port (5516.45)

The Ikelite 5516.45 is a DLM series standard flat port suitable for Ikelite mirrorless series underwater housings. A low volume flat port for use with most shorter length mirrorless interchangeable macro lenses. A 67mm threaded front allows for the attachment of external wet lenses. The front of the port accepts standard 3.0 inch diameter colour filters, including the yellow barrier filter for fluorescence photography. Comes complete with vinyl port cover, spare securing screws, spare o-ring and 1cc tube of silicone lubricant.

To check which DLM port you require for your lens please click here.


£239.00
(Inc VAT)
Tick to add
Ikelite DLM Superwide 6 Inch Dome Port (5516.11):

Ikelite DLM Superwide 6 Inch Dome Port (5516.11)

The Ikelite 5516.11 is a DLM series superwide 6 inch dome port suitable for Ikelite mirrorless series underwater housings. This optical grade 6 inch diameter dome allows you to fully take advantage of your super wide angle lens. This port is incredibly compact making it easy to shoot close focus wide angle, when you need to be within inches of your subject. The acrylic front element also makes it lightweight and easy to pack for travel. Comes complete with neoprene cover, spare securing screws, spare o-ring and 1cc tube of silicone lubricant.

To check which DLM port you require for your lens please click here.


£319.00
(Inc VAT)
Tick to add

Specification

  • Ikelite underwater housing suitable for the Olympus OM-D E-M1 Mark II mirrorless digital camera model.
  • Perfect for any wet environment including surf, dive and pool use.
  • Lens port is not included.
  • Supremely functional for maximum creative control - access is provided for all important camera functions (controls are not provided for diopter adjustment control, one touch white balance button, preview button and mode dial lock).
  • The controls are laser etched into the back and will never fade or fall off.
  • The shutter lever has been updated to a more sensitive and natural feeling curved design.
  • The cameras large super bright LCD screen is viewable edge to edge through the back of the housing.
  • A Supereye viewfinder is included for a clear view of the cameras EVF underwater.
  • The new ABS-PC blend provides strength and corrosion free performance with minimal maintenance.
  • The new white colour helps to deflect the sun to keep the camera running cooler for longer and also provides a superior contrast for an enhanced view of the camera, LCD screen and o-ring seal.
  • An integrated TTL circuit is fine tuned to the latest Olympus flash exposure protocol for the most accurate exposure possible when used with Ikelite DS series strobes.
  • As the Olympus OM-D E-M1 Mark II camera does not feature a built in flash triggering of fibre optic strobes is not supported at this time, a strobe must be connected by an electrical sync cord.
  • A bright constant on video light can be used instead or in addition to a flash.
  • Although not as bright as a strobe flash a constant on light provides added versatility because they can be used for focus assist and for improved colours when shooting video.
  • The front loading camera mount plate makes installation and removal quick and easy and does not need to be removed for battery or memory card access.
  • Slightly negative buoyancy in fresh water (actual buoyancy varies depending on choice of lens and port).

To check which DLM type B port you require please click here. Lens ports can be found on our website here.

Please note the warranty on underwater housings does not cover damage to your camera caused by water ingress. It is your responsibility to insure your equipment with a specialist underwater equipment insurance company, click here for a quote.

Images

Ikelite Underwater Housing For Olympus E-M1 Mark II (6952.02) Large

Reviews


Write your own Ikelite Underwater Housing For Olympus E-M1 Mark II (6952.02) Review

Be the first to write a review about the Ikelite Underwater Housing For Olympus E-M1 Mark II (6952.02)

FAQs

Ask Bristol Cameras a question about the Ikelite Underwater Housing For Olympus E-M1 Mark II (6952.02)

Please check any common questions above before posting as we may not reply to any questions that have been answered previously. We reserve the right to publish your question to this website for the future benefit of other users with similar queries. We may carry out minor editorial changes to the content. All FAQ's remain copyright Bristol Cameras.


Ikelite Underwater Housing For Olympus E-M1 Mark II (6952.02) Question

Question: Is the Ikelite Underwater Housing For Olympus E-M1 Mark II (6952.02) in stock?

Bristol Cameras Answer: As per most accessories listed on this website we do not have the resources to maintain stock info on several thousand smaller items. We keep many of the accessories on our site in stock and even if we don't have the Ikelite Underwater Housing For Olympus E-M1 Mark II (6952.02) in stock, it is likely that it will be available from suppliers within 2-3 working days.
Ikelite Underwater Housing For Olympus E-M1 Mark II (6952.02) Question

Question: How much does delivery of the Ikelite Underwater Housing For Olympus E-M1 Mark II (6952.02) cost?

Bristol Cameras Answer: This depends on the total value of your order and the shipping destination. For more information on delivery costs click here.
Ikelite Underwater Housing For Olympus E-M1 Mark II (6952.02) Question

Question: Can you send parcels to me outside of the UK?

Bristol Cameras Answer: Unfortunately, we do not send goods outside of the UK.
Ask Bristol Cameras a question about the Ikelite Underwater Housing For Olympus E-M1 Mark II (6952.02)

Please check any common questions above before posting as we may not reply to any questions that have been answered previously. We reserve the right to publish your question to this website for the future benefit of other users with similar queries. We may carry out minor editorial changes to the content. All FAQ's remain copyright Bristol Cameras.

Due to staff absence, FAQs are currently suspended. If you have an urgent question or want to check stocks please give the store a ring on either 01179 290435 or 01179 140089. Thank you.

Newsletter Signup:
Shopping Cart Shopping Cart
Items in Basket
0 item(s)
Total cost of Items
£0.00
Facebook Like
Digital Camera Battery
Product Reviews

Reflecta Super 8 | Normal 8 Film Scanner Memory Bundle
Part 2 of review... 2. It is important to adjust the X-Y position of ...

Reflecta Super 8 | Normal 8 Film Scanner Memory Bundle
I have had this for10 days, using it to scan 50-60 4min. reels of stan...

Olympus LB-T01 Lens Barrier For Tough TG Series
bought this from Bristol Cameras to go with my TG-6. I felt even when ...

Ricoh CA-3 Cable Switch
...

Pentax Image Sensor Cleaning Kit (O-ICK1)
...

More Product Reviews

jet web design
.