Ikelite Underwater Housing For Sony Alpha A6300 (6910.63)

Replacement o-ring for various Ikelite underwater housings. An essential spare part for your underwater housing to have in your equipment bag on any dive trip in case the one in your housing cracks or is damaged as the o-ring gives the housing its water resistance.

The Ikelite DS51 is a compact and lightweight strobe which is ideal for the travelling underwater photographer. Depth rated to 90 metres (300 feet). You can easily switch between TTL / Auto and any of the 6 manual power settings via a large, easy to adjust dial on the back of the strobe. Full recycle in 3.5 seconds (much shorter when not shooting at full power). There are a variety of arms and cords available separately to suit your housing. Powered by 4x AA batteries.

The Ikelite DS160 is a powerful underwater strobe which provides the most colourful and natural wide angle lighting on the market. Depth rated to 100 metres (328 feet). Professional grade round xenon flash tube and powder coated reflector produce a soft, stunningly warm 4800K light. Built in modeling light automatically turns off and back on when taking a still photo to avoid over exposure. A high capacity NiMh rechargeable battery pack provides longevity and rapid firing that no current set of AA batteries can provide. 10 1/2 stop manual control increments. Guide number of 24 at 1 metre / ISO 100. Approx 225 full flashes per charge. 1.5 second recycle time at full power. Ikelite ICS 5 pin bulkhead electrical sync connection. Comes complete with DS160 strobe, 4066.5 rechargeable NiMh battery pack, 0591.4 battery pack cover, smart charger, 0591.3 diffuser, 4081.4 1 inch ball mount, waterproof bulkhead cap and 1cc tube of silicone lubricant.

The Ikelite DS161 is a powerful underwater strobe which is one of the brightest strobes on the market. Depth rated to 100 metres (328 feet). Built in video / modelling light which automatically shuts off when the flash fires to avoid over exposing the image. You can easily switch between TTL and any of the 10 manual power settings via a large, easy to adjust dial. Full recycle in 1.5 seconds (much shorter when not shooting at full power). There are a variety of arms and cords available separately to suit your housing. Powered by a 7.2V 3300mAh NiMh rechargeable battery pack with easy to use quick release toggle system. Comes complete with DS161 strobe, NiMh rechargeable battery pack, battery pack cover, smart charger for NiMh, diffuser, 1 inch ball mount, waterproof bulkhead cap and silicone lubricant.

This Ikelite 4103.51 TTL sync cord is used to attach an Ikelite underwater housing to a TTL Ikelite DS Substrobe (ICS5 to ICS5). These latest TTL sync cords can only be used with TTL DS series Substrobes, do not connect a non TTL strobe using this cord.

Single handle and tray assembly which is suitable for Ikelite Compact Digital and Ultra Compact Digital still housings. Also fits non Ikelite housings, such as those from Canon, Panasonic, Olympus and Sony, which feature a central 1/4-20 bottom mount. Hard coat anodised aluminium tray with comfortable rubberised handle grips. Mounting points and hardware are provided for both Ikelite and non-Ikelite housings for compact digital cameras. A central 1/4-20 threaded mounting point allows for the attachment of a tripod directly to the bottom of the tray. The Ikelite Quick Release handle has become a favourite over the years for attachment and release of your lighting arm at the touch of a button. The tray with release handle comes with the necessary hardware to mount to Ikelite housings featuring female mounting points with 3 inch (76mm) spacing. Ikelite housings below serial number 37100 with male threaded tray mounting bolts on the bottom require 9523.09 Tray Spacer, sold separately.

Dual handle and tray assembly which is suitable for Ikelite Compact Digital and Ultra Compact Digital still housings plus housings from Canon, Panasonic, Olympus and Sony. Dual handles provide greater stability underwater and also provides attachment points for external lighting and accessories. Hard coat anodised aluminium tray with comfortable rubberised handle grips. 114g lighter than the previous model (9523.62). Mounting points and hardware are provided for both Ikelite and non Ikelite housings for compact digital cameras. One button quick release allows easy attachment and removal of arm components. Ikelite housings below serial number 37100 with male threaded tray mounting bolts on the bottom require 9523.09 Tray Spacer, sold separately.

This is a great choice to mount almost any strobe or video light to an Ikelite quick release handle. The two segment arm is easily adjustable on-the-fly and perfectly suited to any shooting scenario from macro close-up to super wide angle. The 1-inch ball components feature a groove and o-ring to prevent slippage for improved holding power with less force. While underwater, clamps may be finger-tightened to keep lighting in place yet allow repositioning without loosening the clamp. All parts are hard coat type III anodized for a long lasting, scratch resistant finish. Ikelite 1-inch ball components are compatible with most 1-inch arm system components from Aquatica TLC, Ultralight, Sea & Sea, INON, Nauticam and others. The slotted arm sections provide opportunities to mount an additional lightweight accessory almost anywhere along the length of an arm by adding a Sliding Ball Mount. The auxiliary clamps at the bottom of the arm provide an additional mounting location for a focus light or to attach a top handle if using two arms.

This is a great choice to mount almost any strobe or video light to an Ikelite quick release handle. The single segment arm is compact and lightweight, especially good for macro work. Additional extensions and clamps can be added (sold separately). Ikelite 1-inch ball components feature a groove and o-ring to prevent slippage for improved holding power with less force. While underwater, clamps may be finger-tightened to keep lighting in place yet allow repositioning without loosening the clamp. All parts are hard coat type III anodized for a long lasting, scratch resistant finish. Ikelite 1-inch ball components are compatible with most 1-inch arm system components from Aquatica TLC, Ultralight, Sea and Sea, Inon, Nauticam, and others. The slotted arm sections provide opportunities to mount an additional lightweight accessory almost anywhere along the length of an arm by adding a Sliding Ball Mount. The auxiliary clamps at the bottom of the arm provide an additional mounting location for a focus light or to attach a top handle if using two arms.