Ikelite 200DL Underwater Housing For Nikon Z8 Mirrorless Camera (71069)

LENS PORT REQUIRED (Sold Separately)
A compatible lens port is required for waterproof operation (sold separately). Choose the correct port components on the lens you will be shooting. You can view the port chart here.

For the underwater photographer, the Nikon Z8 is one of the most exciting mirrorless cameras ever released. Nikon has literally taken all of the photo and video performance of their flagship Z9 camera and shrunk them down into a package that is easy to travel and dive with.

The Ikelite 200DL Underwater Housing is perfectly suited to making the most out of this powerful camera. Every element is optimized for lightweight strength, reliability, and field serviceability. The Ikelite 200DL the only housing that allows you to clearly see the camera and o-ring after assembling the system. Our products are made in the USA and backed by a team of customer service staff who dive and use the equipment.

Add an optional USB-C Charging & Data Transfer Bulkhead to keep diving all week without opening and closing your housing.

Pre-dive checks
There is no greater assurance than being able to see your camera and o-ring seal through the back of the housing. Ikelite's signature open-groove design suspends the rear o-ring in a natural position that is easier to maintain and more reliable than forcing the o-ring into a channel. Once the housing is closed you can see the o-ring form a solid, waterproof seal.

We recommend using a pump with gauge to pull a vacuum on the housing and check for leaks prior to entering the water.

Wi-Fi transfer
Use the camera's built-in Wi-Fi feature to download photos to another device without removing the camera from the housing. The Wi-Fi feature is only usable above water within close proximity to the connected device.

Controls
Controls are provided for everything except Sub-selector up/down/left/right (press in is operational), Fn1, Fn2, Diopter adjustment control. As strobe connector the housing has a bulkhead with manual hotshoe. You can add an extra accessory through the M16 accessory port.

Weight: 2.13kg
Dimensions: 220 x 175 x 165 mm

In the box:
Housing for Nikon Z8
Rear O-ring # 0132.61 (installed)
Front O-ring # 0132.45 (installed)
Zoom Gear Retainer # 75900 (installed)
Port Hole Cover # 0200.92 (installed)
Waterproof Bulkhead Cap # 9104.7 (installed)
Base with Left-Hand Quick Release Handle # 4077.67 (installed)
Tool for Zoom Gear Retainer # 0945.06
.050" Hex Key # 0945.11
1/16" Hex Key # 0945.16
Silicone Lubricant 1cc tube

Please note the warranty on underwater housings does not cover damage to your camera caused by water ingress. It is your responsibility to insure your equipment with a specialist underwater equipment insurance company, click here for a quote.