Ikelite Optical Slave Converter For DS Strobes (4403)

Product Code: 4403

£149.00 (Inc. VAT)

Available to order

Free Shipping

New

Genuine UK Stock

Trigger your Ikelite DS-series strobe off any camera or strobe flash. The Optical Slave Converter simply attaches to the strobes electrical bulkhead in place of a sync cord connector. The enlarged slave window provides approximately 90 degrees field of view for remote triggering. Or thread on the included fiber optic port for the attachment of and triggering via a fiber optic cord. The Optical Slave Converter can be extended using the optional 3-foot Extension Cord for creative backlighting in wrecks, caves, and pool studio set-ups. It can also be used above water for studio photography work. The Optical Slave Converter supports manual exposure modes as set on the attached DS strobe. TTL exposure mode is not supported. The Optical Slave Converter automatically configures itself for compatibility with both pre-flash and non pre-flash camera modes. No setting of small switches or confusion over number of pre-flashes. Simply turn on your strobe and take one picture to configure. An individual Optical Slave Converter is needed for each strobe. Use of multiple strobes requires one Optical Slave Converter per strobe. The Optical Slave Converter supports DS50, DS51, DS125, DS160 and DS161 strobes. If your primary purpose is to trigger a flash through a camera housing, we recommend the Fiber Optic Converter instead.

  • Trigger your Ikelite DS-series strobe off any camera or strobe flash.
  • The Optical Slave Converter simply attaches to the strobes electrical bulkhead in place of a sync cord connector.
  • The enlarged slave window provides approximately 90 degrees field of view for remote triggering.
  • Or thread on the included fibre optic port for the attachment of and triggering via a fibre optic cord.
  • The Optical Slave Converter can be extended using the optional 3-foot Extension Cord for creative backlighting in wrecks, caves, and pool studio set-ups.
  • It can also be used above water for studio photography work.
  • The Optical Slave Converter supports manual exposure modes as set on the attached DS strobe.
  • TTL exposure mode is not supported.
  • The Optical Slave Converter automatically configures itself for compatibility with both pre-flash and non pre-flash camera modes.
  • No setting of small switches or confusion over number of pre-flashes.
  • Simply turn on your strobe and take one picture to configure.
  • An individual Optical Slave Converter is needed for each strobe.
  • Use of multiple strobes requires one Optical Slave Converter per strobe.
  • The Optical Slave Converter supports DS50, DS51, DS125, DS160 and DS161 strobes.
  • If your primary purpose is to trigger a flash through a camera housing, we recommend the Fibre Optic Converter instead.
  • Depth rating of 90 metres (300 feet).
  • Dimensions: 28 x 69mm
  • Weighs 45 grams.
  • Can you send parcels to me outside of the UK?

    Unfortunately, we do not send goods outside of the UK.

  • How much does delivery of the Ikelite Optical Slave Converter For DS Strobes (4403) cost?

    This depends on the total value of your order and the shipping destination. For more information on delivery costs click here.

  • Is the Ikelite Optical Slave Converter For DS Strobes (4403) in stock?

    As per most accessories listed on this website we do not have the resources to maintain stock info on several thousand smaller items. We keep many of the accessories on our site in stock and even if we don’t have the Ikelite Optical Slave Converter For DS Strobes (4403) in stock, it is likely that it will be available from suppliers within 2-3 working days.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

    Part ExchangeSell





    Enter your details above and we will be in touch asap to give you a value for your equipment.