Ikelite RC1 Olympus | Panasonic TTL Receiver For DS Strobes

Product Code: 4412

£149.00 (Inc. VAT)

Available to order

Free Shipping

New

Genuine UK Stock

Enjoy true Olympus or Panasonic Lumix TTL strobe exposure via fibre optic connection with your compatible Ikelite DS strobe. With the RC1 TTL Receiver and a compatible camera with RC flash mode, actual exposure data is calibrated and communicated directly by the camera. This is far more accurate and consistent than slave TTL modes built into some underwater strobes which watch the cameras built in flash and react. An individual RC1 TTL Receiver and compatible fibre optic cord is needed for each strobe. Use of two strobes requires two receivers. This product attaches to an Ikelite DS strobe. It is not intended to be attached to a housing and will provide no functionality if attached to a housing bulkhead. This receiver is not compatible with non Ikelite strobes or non digital Ikelite strobes. The sensor makes DS strobes compatible with the Olympus and Panasonic Lumix RC flash mode, providing automatic TTL exposure. For accurate performance set the DS strobe to TTL and the camera’s flash mode to RC. Using the cameras flash exposure compensation controls to make fine tuned adjustments to the strobe’s intensity.

  • Enjoy true Olympus or Panasonic Lumix TTL strobe exposure via fibre optic connection with your compatible Ikelite DS strobe.
  • With the RC1 TTL Receiver and a compatible camera with RC flash mode, actual exposure data is calibrated and communicated directly by the camera.
  • This is far more accurate and consistent than slave TTL modes built into some underwater strobes which watch the cameras built in flash and react.
  • An individual RC1 TTL Receiver and compatible fibre optic cord is needed for each strobe.
  • Use of two strobes requires two receivers.
  • This product attaches to an Ikelite DS strobe.
  • It is not intended to be attached to a housing and will provide no functionality if attached to a housing bulkhead.
  • This receiver is not compatible with non Ikelite strobes or non digital Ikelite strobes.
  • The sensor makes DS strobes compatible with the Olympus and Panasonic Lumix RC flash mode, providing automatic TTL exposure.
  • For accurate performance set the DS strobe to TTL and the camera’s flash mode to RC.
  • Using the cameras flash exposure compensation controls to make fine tuned adjustments to the strobes intensity.
Camera & Housing Compatibility
Ikelite Housing Models:

  • Olympus OM-D E-M10 Mark III in Ikelite Housing # 6950.13
  • Olympus Stylus 1s in Ikelite Housing # 6139.51
  • Olympus Tough TG-3, TG-4 in Ikelite Housing # 6233.03 / 6233.04 / 6233.05
  • Olympus Tough TG-5, TG-6 in Ikelite Housing # 6233.06 / 6233.07

Non-Ikelite Housing Models:

  • Olympus OM-D E-M1 Mark II with FL-LM3 flash in Olympus or Nauticam Housing
  • Olympus OM-D E-M5 Mark II with FL-LM3 flash in Olympus, Nauticam, or Isotta Housing
  • Olympus OM-D E-M10 in Nauticam Housing
  • Olympus OM-D E-M10 Mark II in Nauticam Housing
  • Olympus OM-D E-M10 Mark III in Nauticam Housing
  • Olympus Tough TG-3, TG-4 in Olympus, Nauticam, or Recsea Housing
  • Olympus Tough TG-5 in Olympus, Nauticam, Isotta, or Recsea Housing
  • Panasonic LUMIX GH3, GH4 with DMW-FL70 flash in any housing that supports use of the DMW-FL70 flash
  • Panasonic LUMIX GH5, GH5s with DMW-FL70 flash in Nauticam or any housing that supports use of the DMW-FL70 flash
  • Panasonic LUMIX GX8 with DMW-FL70 flash in Nauticam Housing
  • Panasonic LUMIX LX100 II with VEK0V37Z1-A flash (RC1 Receivers built on or after November 9, 2018 and designated by a 1.1 on the receiver body)

Fibre Optic Cord Compatibility

  • Ikelite Fiber Optic Coiled Cord # 4501
  • INON Optical D Cable "Non-wireless type" L-Connector
  • SEA&SEA Fiber Optic Cable (L-type) # 50107
  • SEA&SEA Fiber Optic Cable II # 50128
  • Olympus UW Fiber Optic Cable PTCB-E02
  • Nauticam Optical Fiber Cable # 26211 Nauticam to INON
  • Nauticam Optical Fiber Cable # 26212 Nauticam to Sea&Sea

Strobe Compatibility

  • Ikelite DS50 above serial # 70000
  • Ikelite D51
  • Ikelite DS125 above serial # 5000
  • Ikelite DS160, DS161
  • Ikelite DS200 above serial # 7163

This product is not compatible with non-digital Ikelite strobes, SEA&SEA, INON, or other non-Ikelite strobes.

In the Box

  • RC1 Receiver
  • Connector protector # 0301.12
  • Can you send parcels to me outside of the UK?

    Unfortunately, we do not send goods outside of the UK.

  • How much does delivery of the Ikelite RC1 Olympus | Panasonic TTL Receiver For DS Strobes cost?

    This depends on the total value of your order and the shipping destination. For more information on delivery costs click here.

  • Is the Ikelite RC1 Olympus | Panasonic TTL Receiver For DS Strobes in stock?

    As per most accessories listed on this website we do not have the resources to maintain stock info on several thousand smaller items. We keep many of the accessories on our site in stock and even if we don't have the Ikelite RC1 Olympus | Panasonic TTL Receiver For DS Strobes in stock, it is likely that it will be available from suppliers within 2-3 working days.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

    Part ExchangeSell

    12345678910

    12345678910

    12345678910

    12345678910

    Enter your details above and we will be in touch asap to give you a value for your equipment.