- Enjoy true Olympus or Panasonic Lumix TTL strobe exposure via fibre optic connection with your compatible Ikelite DS strobe.
- With the RC1 TTL Receiver and a compatible camera with RC flash mode, actual exposure data is calibrated and communicated directly by the camera.
- This is far more accurate and consistent than slave TTL modes built into some underwater strobes which watch the cameras built in flash and react.
- An individual RC1 TTL Receiver and compatible fibre optic cord is needed for each strobe.
- Use of two strobes requires two receivers.
- This product attaches to an Ikelite DS strobe.
- It is not intended to be attached to a housing and will provide no functionality if attached to a housing bulkhead.
- This receiver is not compatible with non Ikelite strobes or non digital Ikelite strobes.
- The sensor makes DS strobes compatible with the Olympus and Panasonic Lumix RC flash mode, providing automatic TTL exposure.
- For accurate performance set the DS strobe to TTL and the camera’s flash mode to RC.
- Using the cameras flash exposure compensation controls to make fine tuned adjustments to the strobes intensity.
- Olympus OM-D E-M10 Mark III in Ikelite Housing # 6950.13
- Olympus Stylus 1s in Ikelite Housing # 6139.51
- Olympus Tough TG-3, TG-4 in Ikelite Housing # 6233.03 / 6233.04 / 6233.05
- Olympus Tough TG-5, TG-6 in Ikelite Housing # 6233.06 / 6233.07
Non-Ikelite Housing Models:
- Olympus OM-D E-M1 Mark II with FL-LM3 flash in Olympus or Nauticam Housing
- Olympus OM-D E-M5 Mark II with FL-LM3 flash in Olympus, Nauticam, or Isotta Housing
- Olympus OM-D E-M10 in Nauticam Housing
- Olympus OM-D E-M10 Mark II in Nauticam Housing
- Olympus OM-D E-M10 Mark III in Nauticam Housing
- Olympus Tough TG-3, TG-4 in Olympus, Nauticam, or Recsea Housing
- Olympus Tough TG-5 in Olympus, Nauticam, Isotta, or Recsea Housing
- Panasonic LUMIX GH3, GH4 with DMW-FL70 flash in any housing that supports use of the DMW-FL70 flash
- Panasonic LUMIX GH5, GH5s with DMW-FL70 flash in Nauticam or any housing that supports use of the DMW-FL70 flash
- Panasonic LUMIX GX8 with DMW-FL70 flash in Nauticam Housing
- Panasonic LUMIX LX100 II with VEK0V37Z1-A flash (RC1 Receivers built on or after November 9, 2018 and designated by a 1.1 on the receiver body)
Fibre Optic Cord Compatibility
- Ikelite Fiber Optic Coiled Cord # 4501
- INON Optical D Cable “Non-wireless type” L-Connector
- SEA&SEA Fiber Optic Cable (L-type) # 50107
- SEA&SEA Fiber Optic Cable II # 50128
- Olympus UW Fiber Optic Cable PTCB-E02
- Nauticam Optical Fiber Cable # 26211 Nauticam to INON
- Nauticam Optical Fiber Cable # 26212 Nauticam to Sea&Sea
Strobe Compatibility
- Ikelite DS50 above serial # 70000
- Ikelite D51
- Ikelite DS125 above serial # 5000
- Ikelite DS160, DS161
- Ikelite DS200 above serial # 7163
This product is not compatible with non-digital Ikelite strobes, SEA&SEA, INON, or other non-Ikelite strobes.
- RC1 Receiver
- Connector protector # 0301.12
Reviews
There are no reviews yet.